User manual PHILIPS AZ1226/00C

[. . . ] If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note:The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. Environmental information All unnecessary packaging material has been omitted. The packaging can be easily separated into three materials: cardboard, polystyrene and plastic. Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, dead batteries and old equipment. 1 2 7 1 2 3 FM % $ # @ ! [. . . ] 3 Press PROG to store the desired track. Display shows P02 (up to 20 or 10 in sequence), indicating the next program location available. 4 Repeat steps 2 to 3 to select and store all desired tracks. To review your program In the stop position, press and hold PROG 2 seconds. The display shows all the stored tracks in sequence. Helpful hints: ­ Display shows P01 if no track is programmed ­ If you try to store more than 20 tracks (for MP3-CD: 10 tracks), no track can be selected and the display will show P--. To erase a program You can erase a program by: ­ pressing 9 (twice during playback or once in the stop position); ­ selecting RADIO or TAPE sound source; ­ opening the disc door; Display: PROG disappears. Cassette Recorder Tape operation/recording 1 2 Playing a tape Adjust the source selector to TAPE/OFF. Press STOP·OPEN 9/ to open the cassette holder, insert a cassette and close the deck. Fast forwarding/rewinding Press SEARCH 5 or 6 until you reach your desired passage. Press 9/ to stop rewinding/fast forwarding. legal music files from the internet to your computer hard disc, or create such files by converting audio CD files in your computer through appropriate encoder software. (128kbps bit rate or higher is recommended for MP3 files. ) · Creating a MP3 CD: burn the music files from your computer hard disc on a CDR or CDRW using your CD burner. 3 4 5 6 1 2 Helpful Hints: ­ Make sure that the file names of the MP3 files end with . mp3 . ­ Total number of music files and albums: around Selecting a different track · Press or § once or repeatedly until the desired track number appears in the display. For MP3-CD: First press ALBUM + (up) once or more to find your album. · In the pause/stop position, press 2; to start playback. 350 (with a typical file name length of 20 characters) ­ The length of file names affects the number of tracks for playback. With shorter file names, more files can be burned on a disc. Finding a passage within a track 1 During playback, press and hold down or §. The disc is played at high speed and low volume. When you recognize the passage you want release or §. Normal playback resumes. Playing a disc This player plays Audio Discs including CD-R/ CD-RW, and MP3 CD. Do not try to play a CD-ROM, CD-I, CDV, VCD, DVD or computer CD. · CDs encoded with copyright protection technologies by some record companies may be unplayable by this product. · For a disc with CD Audio tracks and MP3 files, only the CD Audio tracks will be played. 2 To open the disc door, lift the disc door at the edge marked LIFT TO OPEN. [. . . ] The lens of the CD player should never be touched!Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. Always close the CD-tape door to avoid dust on the lens. [. . . ]