User manual PHILIPS AZ1307

[. . . ] STOP·OPEN 0 9 - stops the tape; - open the cassette compartment PAUSE ; - pauses playback or recording 9 Source selector: CD/MP3, MW, FM, TAPE/OFF ­ selects CD/MP3-CD, radio or tape source of sound; ­ switches off the set CONTROLS/POWER SUPPLY BACK PANEL 0 Telescopic aerial - improves FM reception !Battery compartment - for 6 batteries, type R-14, UM2 or C-cells @ AC MAINS - inlet for mains lead. # Voltage selector (inside the battery compartment, some versions only) - adjust to match the local voltage 110/220V before plugging in the set REMOTE CONTROL VOLUME +, ­ ­ adjusts volume level (up, down) SHUFFLE ­ plays all CD tracks in random order 2; ­ starts/ pauses CD playback SEARCH 5, 6 ­ searches backwards/ forwards within a track 5 ALBUM/PRESET 3, 4 MP3 only: selects albums MW/FM: selects a preset radio station (up, down) 6 TUNING , § ­ tunes to tuner stations 7 9 ­ stops CD playback; ­ erases a CD programme 8 ¡, TM ­ skips to the beginning of a current track previous/ subsequent track 9 REPEAT ­selects repeat modes 1 2 3 4 CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. MAINS SUPPLY Whenever convenient, use the mains supply to conserve battery life. [. . . ] 3 Press -, + (on the remote control 3, 4) once or more to allocate a number from 1 to 10. 5 Repeat steps 1-4 to store other stations. Helpful hints: You can erase a preset station by storing another frequency in its place. DIGITAL TUNER Autostore Autostore automatically starts programming radio stations from preset 1. TMAvailable stations are programmed (MW or FM). After all stations are stored, the first autostore preset station will then automatically play. To listen to a preset or autostore station Press the ALBUM/PRESET -, + (on the remote control 3, 4) buttons once or more until the desired preset station is displayed. Helpful hints: with . mp3. CD/MP3 PLAYER ­ Make sure that the file names of the MP3 files end ­ Total number of music files and albums: around 350 CD/MP3 PLAYER Selecting a different track · Press or § (on the remote control ¡ or TM) once or repeatedly until the desired track number appears in the display. For MP3-CD: first press ALBUM/PRESET -, + (on the remote control 3, 4) once or more to find your album. · In the pause/stop position, press 2; to start playback. Finding a passage within a track 1 During playback, press and hold or § (or SEARCH 5, 6 on the remote control). TM The CD is played at high speed and low volume. Do not try to play a CD-ROM, CD-I, CDV, VCD, DVD or computer CD. IMPORTANT!Changing tuning grid (some versions only) · CDs encoded with copyright protection techIn North and South America the frequency step nologies by some record companies may be between adjacent channels in the MW (AM) and FM unplayable by this product. band are 10 KHz and 100 KHz respectively. In the rest · For a disc with CD Audio tracks and MP3 of the world this step is 9 KHz and 50 KHz. Usually the frequency step has been preset in the factory for files, the MP3 files may be unplayable, your area. · Total number of albums + tracks: Max. Press MODE on the set for at least 5 seconds. (for MP3) TM The display shows either Gr9 or Gr10. Helpful hints: All preset stations will be affected 2 Insert a CD with the printed side facing up and and you may need to reprogramme stations. CD PLAYER TM is displayed as the CD player scans the contents of a disc and then About MP3 Audio CD: total playing time and total number of The music compression technology MP3 (MPEG1 tracks appear. Audio Layer 3) significantly reduce the digital data of MP3: total number of tracks/albums appear. [. . . ] TM Playing of the CD/program starts automatically from the beginning. You don't need to start the CD player separately. Press PAUSE ; again to resume recording. 7 To stop recording, press STOP/OPEN 9/. [. . . ]