User manual PHILIPS AZ1310-00C

[. . . ] 2 SHUFFLE - plays all CD tracks in random order. 4 SEARCH 5 , 6 - searches backwards/ forwards within a track. 5 PRESET + , - (up, down) - selects a preset radio station. 6 TUNING , § (down, up) - tunes to tuner stations. [. . . ] (See 6) · Remote control (AZ1325 model only) Insert 2 batteries, type AAA, R03 or UM4 (preferably alkaline). (See 8) DIGITAL TUNER DIGITAL TUNER Tuning to radio stations 1. station frequency, waveband are shown (See 3) 2. Press and hold SEARCH or § until the frequency in the display starts running. TM The radio automatically tunes to a station of sufficient reception. Display shows Srch during automatic tuning. Repeat step 2 if necessary until you find the desired station. · To tune to a weak station, press or § briefly and repeatedly until you have found optimal reception. To improve radio reception: · For FM, extend, incline and turn the telescopic aerial. Reduce its length if the signal is too strong. · For MW , the set uses a built-in aerial. Autostore Autostore automatically starts programming radio stations from preset 1. Available stations are programmed in order if the station with sufficient reception strength. · Press PROG for 2 seconds or more to activate autostore programming. TM The display shows AUtO, PROG blinks, followed by the radio station details when stored. After all stations are stored, the first preset station will then automatically play. To listen to a preset station · Press the PRESET + , - buttons once or more until the desired preset station is displayed. · Remote control (AZ1325 models only): optionally, press PRESET + , - to select your preset station. CD PLAYER Programming track numbers In the stop position, select and store your CD tracks in the desired sequence. Up to 20 tracks can be stored in the memory. Press SEARCH or § on the set to select your desired track number. TM Display: PROG, Prog briefly and your selected track number. (See 5) TM If you attempt to program without first selecting a track number, noSE is shown. [. . . ] Please observe the local regulations regarding the disposal of packaging, exhausted batteries and old equipment. Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. [. . . ]