User manual PHILIPS AZ1407

[. . . ] Open the battery compartment and insert as shown six batteries, type R20, or D-cells. Replace the compartment door, making sure the batteries are firmly and correctly in place. Remove the batteries if exhausted or if they will not be used again for a long period. Batteries contain chemical substances, so they should be disposed of properly. [. . . ] Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. 5 OPERATION GENERAL OPERATION 1. ­ The CD player scans the contents of the CD and the total number of tracks is displayed 5. Press PLAY·PAUSE 2; to start playback. Adjust the sound using the VOLUME control and the DBB switch. To interrupt playback, press PLAY·PAUSE 2;. Press PLAY·PAUSE 2; again to continue playback. Set the source selector to TAPE/OFF position to switch off the set. Note: CD playback will also stop when: ­ the CD has reached the end; ­ the CD door is opened; ­ the source selector is in the RADIO or TAPE/OFF position. STOP E SEARCH or § Selecting a different track during playback ­ You can jump to the next track by pressing SEARCH § once. If you want to skip more than one track, press SEARCH § more than once until the display shows the desired track number. ­ If you want to repeat the running track from the beginning, press SEARCH once. If you want to repeat one of the previous tracks, press SEARCH more than once until the display shows the required track number. 8 PLAY RECORD SHUFFL E P SEAR CH MODE CD PLAYER PROGRAMMING TRACK NUMBERS Erasing a program You can erase a program by: ­ opening the CD door. ­ setting the source selector to the TAPE or RADIO position. ­ pressing STOP twice during playback/in the stop position. CASSETTE RECORDER English POWER ·CD ·RA ·TAPE DIO OFF ON DYNAMI C BOOST DBB POWER CASSETTE PLAYBACK 1. Press STOP·OPEN 9 / to open the cassette holder. Adjust the sound using the VOLUME, and DBB controls. By pressing 5 or 6, fast winding of the tape is possible in both directions. To stop playback, press STOP·OPEN 9 /. ­ The keys are automatically released at the end of the tape. Set the source selector to TAPE/POWER OFF position (with the cassette keys released) to switch off the set. BOOST PAUSE STOP · OPEN SEARCH Y·PAU SE PLAY RECORD CASSETTE RECORDING General information on cassette recording ­ Recording is permissible insofar as copyright or other rights of third parties are not infringed. ­ This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording you should use NORMAL type cassettes (IEC I) on which the tabs have not been broken. [. . . ] Press STOP·OPEN 9 / to open the cassette holder. ­ Playing of the CD program starts automatically from the beginning of the program. It is not necessary to start the CD player separately. To resume recording, press PAUSE ; again. [. . . ]