User manual PHILIPS AZ1830

[. . . ] Replace a new battery, and fully insert the battery tray back to the original position. Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst: Do not mix battery types: e. g. Only use batteries of the same type for the set. When inserting new batteries, do not try to mix old batteries with the new ones. [. . . ] Display: 2 and the current track number flash. Helpful hints: ­ ­ ­ The disc playback will also stop when: you open the disc compartment door; you select TUNER or OFF position; the disc has reached the end of the playback. 2 2 1 MP3-CD/ CD Player Finding a passage within a track During playback, press and hold down or §. The disc is played at high speed and low volume. When you recognize the passage you want, release or §. To erase a program You can erase a program by: ­ pressing 9 (twice during playback or once in the stop position); ­ selecting TUNER or OFF position; ­ opening the disc door. · USB Connection Using USB connectivity AZ1830 is fitted with a USB port in the front panel, offering a plug and play feature which allows you to play, from your AZ1830, digital music and spoken contents stored on a USB mass storage device. Using a USB mass storage device, you can also enjoy all the features offered by AZ1830 which are explained and instructed in the sections of disc operation. Compatible USB mass storage devices With the AZ1830, you can use ­ USB flash memory (USB 2. 0 or USB 1. 1) ­ USB flash player (USB 2. 0 or USB 1. 1) · USB device which requires driver installation under Windows XP is not supported. Note: In some USB flash players (or memory devices), the stored contents are recorded using copyright protection technology. Such protected contents will be unplayable on any other devices (such as AZ1830 device). ­ ­ ­ ­ ­ ­ ­ ­ Supported formats: USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 - 65, 536 bytes) MP3 bit rate (data rate): 32-320 kbps and variable bit rate WMA v9 or earlier Directory nesting up to a maximum of 8 levels Number of albums: maximum 99 Number of tracks: maximum 800 ID3 tag v2. 0 or later File name in Uicode UTF8 (maximum length: 128 bytes · Selecting different play modes (See 7 8) You can select and change the various play modes before or during playback, and combine REPEAT modes with PROG. REP ­ plays the current track continuously. REP ALL ­ plays the entire disc/program continuously. SHUF ­ plays all tracks in random order. 1 2 3 To select play modes, press MODE once or more. Press 2; to start playback if in the stop position. To select normal playback, press MODE repeatedly until the various modes are no longer displayed. ­ You can also press 9 to cancel your play modes. Programming tracks You may store up to 20 tracks in the desired sequence. If you like, store any track more than once. 1 In the stop position, press PROG to start programming. Display shows P01 indicating the start of the program. [. . . ] ­ The device is not securely connected to AZ1830's USB port. · Re-connect the device, and make sure that the device is powered on. ­ The device is not supported by AZ1830, or the audio file format stored on the device is not supported by AZ1830. · Use a compatible device/ playable audio file format. Environmental information All unnecessary packaging material has been omitted. The packaging can be easily separated into three materials: cardboard, polystyrene and plastic. [. . . ]