User manual PHILIPS AZ1832B

[. . . ] If it does not, consult your dealer or service center. Connect the power cord to the AC~ MAINS inlet and the wall socket. The set is now ready for use. 1 Source selector: CD/USB/AUX, FM, MW, OFF ­ selects CD/MP3-CD, USB, AUX or radio ­ switches off the set 2 2; ­ starts or pauses disc/USB playback § ­ For disc/ USB play: ­ skips to the beginning of a current/ previous/ later track ­ fast searches backwards and forwards within a track 9 ­ stops disc/USB playback; ­ erases a program Top and front panels (See 1) · · PROG ­ programs tracks and reviews the program 3 Display ­ shows disc/USB play functions 4 ALBUM +/­ For MP3-CD/ WMA/USB play: select albums 5 USB ­ enters USB mode 6 CD ­ enters disc mode 7 MODE ­ selects different play modes: e. g. REPEAT or SHUFFLE (random order) 8 OPEN·CLOSE ­ opens/ closes the CD door 9 TUNING ­ tunes to radio stations 0 VOLUME ­ adjusts volume level !USB DIRECT ­ connects an external USB mass storage device · · 2 Power Supply 3 4 · To switch the set off completely, withdraw the power cord from the wall socket. [. . . ] REP ­ plays the current track continuously. REP ALL ­ plays the entire disc/program continuously. SHUF ­ plays all tracks in random order (not available with PROG). 1 2 3 To select play modes, press MODE once or more. Press 2; to start playback if in the stop position. To select normal playback, press MODE repeatedly until the various modes are no longer displayed. ­ You can also press 9 to cancel your play modes. Programming tracks You may store up to 20 tracks in the desired sequence. If you like, store any track more than once. 1 In the stop position, press PROG to activate programming. Display shows P01 indicating the start of the program and PROG flashes. (See 6) Press or § to select your desired track number. For MP3-CD/WMA: First press ALBUM+/- once or more to find your album. 3 Press PROG to store the desired track. Display shows P02, indicating the next program location available. Repeat steps 2 to 3 to select and store all desired tracks. To review your program In the stop position, press and hold PROG 3 seconds. The display shows all the stored tracks in sequence. Helpful hints: ­ Display shows P01 if no track is programmed. ­ If you try to store more than 20 tracks, no track can be stored and the display will show --- with "PROG" . 2 4 5 USB Connection Using USB connectivity · AZ1832B is fitted with a USB port in the front panel, offering a plug and play feature which allows you to play, from your AZ1832B, digital music and spoken contents stored on a USB mass storage device. Using a USB mass storage device, you can also enjoy all the features offered by AZ1832B which are explained and instructed in the sections of disc operation. Compatible USB mass storage devices With the AZ1832B, you can use ­ USB flash memory (USB 2. 0 or USB 1. 1) ­ USB flash player (USB 2. 0 or USB 1. 1) · USB device which requires driver installation under Windows XP is not supported. Note: In some USB flash players (or memory devices), the stored contents are recorded using copyright protection technology. [. . . ] · Re-connect the device, and make sure that the device is powered on. ­ The device is not supported by AZ1832B, or the audio file format stored on the device is not supported by AZ1832B. · Use a compatible device/ playable audio file format. Display does not function properly/No reaction to operation of any of the controls ­ Electrostatic discharge · Switch off and unplug the set. no indication ­ · ­ · ­ · ­ · ­ · It is set in the USB mode. [. . . ]