User manual PHILIPS AZ1833

[. . . ] Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires. English Controls / Power Suppy Congratulations on your purchase and welcome to Philips! !USB DIRECT ­ connects an external USB mass storage device To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. Back panel (See 1) Supplied accessories ­ AC power cord @ Telescopic antenna ­ improves FM reception # AUX IN jack ­ connects to external audio source $ AC~ MAINS ­ inlet for power cord ­ Audio cable % Battery door ­ open to insert 6 x 1. 5V R-14/ UM2/ C-cells Top and front panels (See 1) Copyright in the U. K. Recording and playback of material may require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972. 1 Source selector: CD/USB/AUX, FM, MW, OFF ­ selects CD/MP3-CD, USB, AUX or radio ­ switches off the set 2 2; ­ starts or pauses disc/USB playback § ­ For disc/ USB play: ­ skips to the beginning of a current/ previous/ later track Power Supply Whenever convenient, use the power supply cord if you want to conserve battery life. [. . . ] Compatible USB mass storage devices With the AZ1833, you can use ­ USB flash memory (USB 2. 0 or USB 1. 1) ­ USB flash player (USB 2. 0 or USB 1. 1) · USB device which requires driver installation under Windows XP is not supported. Note: In some USB flash players (or memory devices), the stored contents are recorded using copyright protection technology. Such protected contents will be unplayable on any other devices (such as AZ1833 device). Supported formats: ­ USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 - 4096 bytes) ­ MP3 bit rate (data rate): 32-320 kbps and variable bit rate ­ WMA v9 or earlier ­ Directory nesting up to a maximum of 8 levels ­ Number of albums: maximum 500 ­ Number of tracks: maximum 999 ­ ID3 tag v2. 0 or later ­ File name in Uicode UTF8 (maximum length: 30 bytes The system will not play or support the following: · Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display. 1 2 Finding a passage within a track Using USB connectivity 2 3 4 5 6 7 ! · Non-supported file formats are skipped. This means that e. g. : Word documents . doc or MP3 files with extension. NTFS audio files · DRM protected WMA files · WMA files in Lossless format Programming tracks You may store up to 20 tracks in the desired sequence. If you like, store any track more than once. 1 REP ­ plays the current track continuously. REP ALL ­ plays the entire disc/program continuously. SHUF ­ plays all tracks in random order (not available with PROG). 1 2 3 To select normal playback, press MODE repeatedly until the various modes are no longer displayed. ­ You can also press 9 to cancel your play modes. Press 2; to start playback if in the stop position. To select play modes, press MODE once or more. In the stop position, press PROG to activate programming. Display shows P01 indicating the start of the program and PROG flashes. (See 6) Press or § to select your desired track number. For MP3-CD/WMA: First press ALBUM+/- once or more to find your album. 3 Press PROG to store the desired track. Display shows P02, indicating the next program location available. Repeat steps 2 to 3 to select and store all desired tracks. [. . . ] no indication ­ · ­ · ­ · ­ · ­ · It is set in the USB mode. No disc inserted Insert a suitable disc Disc badly scratched or dirty Replace/clean CD (See Maintenance) CD-R(W) is blank or the disc is not finalized. Use a finalized CD-R(W) Laser lens steam up Wait until lens has cleared. Sound skips during MP3 playback ­ MP3 file made at compression level exceeding 320kbps · Use a lower compression level to record CD tracks into MP3 format ­ Disc damaged or dirty · Replace or clean disc. Note: DRM-protected WMA disc is not supported. The USB device doesn't play on my AZ1833 5 DISC 6 DISC 9 · To clean the set, use a dry cloth. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing. WMA ­ It is not set in the USB mode. [. . . ]