User manual PHILIPS AZ2055/00C

[. . . ] Before replacing the plug cover, make certain that the cordgrip is clamped over the sheath of the lead ­ not simply over the two wires. This product complies with the radio interference requirements of the European Union. TOP AND FRONT PANELS (See 1) 1SOURCE ­ selects CD/ TUNER / TAPE function 2y ­ power on/ off switch 3Display ­ shows the status of the set 4Cassette recorder keys RECORD 0 ­ starts recording PLAY 2 ­ starts playback SEARCH 5/6 ­ fast winds/rewinds tape STOP/OPEN 9/ ­ opens the cassette compartment ­ stops the tape PAUSE ; ­ pauses playback or recording 5BASS, MID, HIGH ­ EQ keys to adjust the bass, mid & treble frequencies 6PROG CD: programmes tracks and reviews the programme; Tuner: programmes preset radio stations Navigation controls 7, § CD: ­ searches back and forward within a track; ­ skips to the beginning of a current track/ previous/ later track Tuner: ­ tunes to radio stations (down, up). 82; ­ starts or pauses CD playback 99 ­ stops CD playback; ­ erases a CD programme 0MODE ­ selects different play modes: e. [. . . ] Note: CD play will also stop when: ­ the CD door is opened ­ the CD has reached the end ­ you select tape or tuner source. ­ TU is displayed briefly and then the radio station frequency, waveband and, if programmed, a preset number are shown. (See 4) Press BAND once or more to select your waveband. Press and hold or § until the frequency in the display starts running. Repeat steps 2-3 if necessary until you find the desired station. To tune to a weak station, press or § briefly and repeatedly until you have found optimal reception. Programming track numbers In the stop position, select and store your CD tracks in the desired sequence. up to 20 tracks can be stored in the memory. 1 Press or § on the set to select your desired track number. Finding a passage within a track 2 Press PROG. TM If you attempt to programme without first TM The CD is played at high speed and low volume. Selecting a track number, is 2 When you recognize the passage you want, release shown. Note: During a CD program or if shuffle/ repeat TM Display: if you try to programme more active, searching is only possible within a track. Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback, and combine the modes with PROGRAM. Shuffle ­ tracks of the entire CD/ program are played in random order shuffle and repeat all ­ to repeat the entire CD/ programme continuously in random order repeat all ­ repeats the entire CD/ program repeat (and shuffle repeat) ­ plays the current (random) track continuously Reviewing the programme In the stop position, press and hold PROG until the display shows all your stored track numbers in sequence. Reduce its length if the signal is too strong. Direct this aerial by turning the whole set. Programming radio stations You can store up to a total of 30 radio stations in the memory, manually or automatically (Autostore). 3 Press PRESET DOWN/ UP once or more to select a preset number. Note: You can erase a preset station by storing another frequency in its place. CASSETTE RECORDER 1 To select play mode, press MODE once or more. Until the various modes are no longer displayed. [. . . ] 3 Press PAUSE ; and clean the heads A, and the capstan B. WARNING Do not open the set as there is a risk of electric shock!Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee. If a fault occurs, first check the points listed below before taking the set for repair. [. . . ]