User manual PHILIPS AZ2200

[. . . ] To change a fuse in this type of plug proceed as follows: · Remove fuse cover and fuse. · Fix new fuse which should be a BS1362 5A, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5A. [. . . ] Adjusting volume and sound 1 Adjust the volume with the VOLUME control. TM Display shows the volume level and a number from 0-32. (See 2) 2 Press DBB once or more to select dynamic bass boost on or off. 3 To adjust the bass, mid and treble tones, press and hold + or ­ on the BASS, MID, HIGH keys until you reach the desired level, ­5 to +5 TM Display briefly shows BASS, MID, or HIGH and the level. (See 3) Note: To prevent sound interference the bass control options operate exclusively. You cannot combine the bass from BASS with DBB TM The display shows or the indicator is automatically switched off to remind you if you attempt to use both bass settings Mute (for AZ2200 only) 1 Press MUTE on the remote control to interrupt sound reproduction instantly. TM Playback continues without sound and the display flashes . 2 To reactivate sound reproduction you can: ­ press MUTE again; ­ adjust the volume controls; ­ change source. DIGITAL TUNER Tuning to radio stations 1 Press y to on, then press SOURCE to select TUNER. ­ TU is displayed briefly and then the radio station frequency, waveband and, if programmed, a preset number are shown. (See 4) 2 Press BAND once or more to select your waveband. DIGITAL TUNER 3 Press and hold or § until the frequency in the display starts running. TM The radio automatically tunes to a station of sufficient reception. CD PLAYER Playing a CD This CD player plays Audio Discs including CD-Recordables and CD-Rewritables. CD 3 Press 2; to start playback. TM if your CD contains non-audio files 4 To pause playback press 2;. Note: CD play will also stop when: ­ the CD door is opened ­ the CD has reached the end ­ you select tape or tuner source. Selecting a different track · Press or § on the set, once or repeatedly to select. · In the pause/stop position, press 2; to start playback. CASSETTE RECORDER Programming track numbers In the stop position, select and store your CD tracks in the desired sequence. Up to 20 tracks can be stored in the memory. 1 Press or § on the set to select your desired track number. TM If you attempt to programme without first selecting a track number, is shown. 3 Repeat steps 1-2 to select and store all desired tracks. TM Display: if you try to programme more than 20 tracks. Reviewing the programme In the stop position, press and hold PROG until the display shows all your stored track numbers in sequence. 1 Press y to on, then SOURCE to select CD. [. . . ] shuffle and repeat all ­ to repeat the entire CD/ 2 Insert a cassette and close the door. programme continuously in random order 3 Press PLAY 2 to start playback. repeat all ­ repeats the entire CD/ program 4 To pause, press PAUSE ;. repeat (and shuffle repeat) ­ plays the current 5 Press SEARCH 5 or 6 to fast wind the tape. [. . . ]