User manual PHILIPS AZ2535/00C

[. . . ] SUPPLIED ACCESSORIES ­ remote control ­ video cable ­ AC mains lead TOP AND FRONT PANEL (See 1) LCD Display ­ shows the status of the set [dB]: ­ display to indicate bass power. sTANDBY ON y ­ switch the set on/ off. VOLUME ­ adjust volume level or equalizer level SOURCE ­ selects sound source for functions: CD/ FM / MW / GAME AUX/ TAPE 6 p ­ 3. Note: The speakers will be muted when headphones are connected to the set. [. . . ] Direct this antenna by turning the whole set. Programming tuner stations: You can store up to a total of 30 radio stations in the memory (20 FM and 10 MW), manually or automatically (Autostore). autostore Automatic programming will start from preset 1 or a chosen preset number. The set will only program stations which are not in the memory already. Press PRESET preset number where programming should start. Note: If no tuner preset number is selected, default is preset 1 and all your presets will be erased. Press PROG for 4 seconds or more to activate auto store programming. = Display: is shown and available stations are programmed in order of waveband FM, followed by MW , the first preset station will then be played after all stations are stored automatically. Playing a CD This CD player plays Audio Discs including CD-Recordables and CD-Rewritables. Press STANDBY ON y once or more to on, then select CD SOURCE. Insert a CD with the printed side facing up and press down on OPEN· cLOSE to close the CD door. ]Display show , , then scrolls or Different play modes: SHUFFLE and REPEAT (See 4 - 7) You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM. SHUFFLE - tracks of the entire CD/ program are played in random order SHUFFLE REPEAT ALL - to repeat the entire CD/ program continuously in random order REPEAT ALL - repeats the entire CD/ program REPEAT - plays the current track continuously 1. To select play mode, press MODE once or more. ]If you have selected SHUFFLE, playback starts automatically. To select normal playback, press MODE repeatedly until the various modes are no longer displayed. ­ You can also press the 9 to cancel your play mode in playing. Programming track numbers Program in the stop position to select and store your CD tracks in the desired sequence. If you like, store any track more than once. Press SEARCH or § on the set to select your desired track number. =Display: The number of the tracks programmed and the total playing time of programmed tracks is shown briefly. [. . . ] To listen to a preset station Press PRESET + once or more until the desired preset station is displayed. 4 Insert a suitable tape into the cassette deck and close the door. ­ Playing of the CD programme starts automatically from the beginning of the programme. You don't need to start the CD player separately. [. . . ]