User manual PHILIPS AZ2538/00C

[. . . ] Grip both handles when you carry or lift the set. This apparatus is fitted with an approved 13 Amp plug. Fix new fuse which should be a BS1362 5 Amp, A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] To reactivate sound reproduction you can: ­ press MUTE again; ­ adjust the volume controls; ­ change to another source. dIGITAL TUNER (See 3) Tuning to stations 1. Press STANDBY ON y to on, then press SOURCE once or more to select TUNER (or press TUNER once on the remote control). = Display: shows briefly followed by waveband, frequency, and preset station number if already stored. Press BAND / DISPLAY once or more to select your waveband ( TUNER on the remote control) 3. Tuning to stations: you can tune to your stations manually or by automatic search tuning: Press down on or § (5 or 6 on the remote control ) and release button when the frequency in the display starts running. Repeat step 3 if necessary until you find the desired station. Reduce its length if the signal is too strong. Direct this antenna by turning the whole set. Programming tuner stations: You can store up to a total of 30 radio stations in the memory, manually or automatically (Autostore). autostore Automatic programming will start from preset 1. The set will only program stations which are not in the memory already. Press ALBUM / PRESET- or + once or more to select the preset number . Press PROG for 4 seconds or more to activate auto store programming. = Display: is shown and available stations are programmed in order of waveband FM, followed by MW , preset 1 station will then be played after all stations are stored automatically. Press ALBUM / PRESET- or + once or more to allocate a number from 1 to 30 to this station. = Display shows the preset number, waveband and the frequency of the preset station. Repeat the above four steps to store other stations. Note : You can erase a preset station by storing another frequency in its place. To listen to a preset station Press ALBUM / PRESET- or + once or more until the desired preset station is displayed. Use ISO9660 disc format when burning CDROMs. General information The music compression technology MP3 (MPEG Audio Layer 3) reduces the original digital audio data by a factor up to 10 without losing significant sound quality. [. . . ] ⷠSudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. To take a CD out of its box, press the center spindle while lifting the CD. ⷠTo clean the CD, wipe in a straight line from the center towards the edge using a soft, lint-free cloth. [. . . ]