User manual PHILIPS AZ2558/17B

[. . . ] China ______________________________________ LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO. AVISO IMPORTANTE Philips Mexicana, S. A. no se hace responsable por daños o desperfectos causados por: ­ Maltrato, descuido o mal uso, presencia de insectos o roedores (cucarachas, ratones etc. ). ­ Cuando el aparato no haya sido operarado de acuerdo con el instructivo del uso, fuera de los valores nominales y tolerancias de las tensiones (voltaje), frecuencia (ciclaje) de alimentación eléctrica y las características que deben reunir las instalaciones auxiliares. ­ Por fenómenos naturales tales como: temblores, inundaciones, incendios, descargas eléctricas, rayos etc. [. . . ] TM On TV screen, the arrow will move forward/backward in the ALBUM menu. To select a desired track · Press or § on the set repeatedly (or on the remote control, press ¡ , TM) to select a desired track from the current album. TM On TV screen, the arrow will move forward/backward in the TRACK menu. · Use the digital keys on the remote control to select the track under current album directly. For VCD only · Either press 5 or 6 on the remote control repeatedly to select fast search speed (x1, x2, x3 or x4) or press & hold or § on the set for 1 second and then release or § to select fast search speed (x1). Repeat this step to select other speed (x2, x3 or x4). 15 English TM The current track number and elpased time appear on the display. CD/VCD/MP3-CD PROGRAMMING TRACKS English Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored in the memory in any order. In stop mode, press PROG to enter program setting. TM PROG will start flashing and " P01" will be displayed. TM On TV screen, "PROG" program list (5 lines per page) will be displayed. Press / § (or use digits 0 - 9 or press ¡, TM on the remote control) to select the desired track. · MP3-CD mode only: First press ALBUM/PRESET -, + once or more (or press digits 0 - 9 or 3/ 4 on the remote control) to find your album, press PROG to store the selected album, and then press / § (or use digits 0 - 9 or press ¡, TM on the remote control) to select the desired track. Press PROG to confirm the track number to be stored. TM The elapsed time, remaining time in the track/disc (SINGLE REMAIN / TOTAL REMAIN) and EQUALIZER bars appear on the display. Helpful hints: - For a MP3-CD, TOTAL REMAIN is not available. - For a VCD, SINGLE REMAIN is not available. CD/VCD/MP3-CD VIDEO CD English Playing a Video CD with PBC VCD with PBC (Playback Control) will be indicated of the set and on your TV screen as soon as they are inserted. PBC is a predefined play sequence stored on the VCD. Switch on the TV, insert a VCD with PBC. If the menu consists of a list of titles, you can select a sequence directly 1. Press digits 0 - 9 on the remote control to select your choice. TM The VCD starts playing of the selected sequence automatically. Press RETURN on the remote control to go back to the previous menu. Helpful hints: - If a menu consists of more than one page, press ¡ or TM to go through the pages. Switching off PBC · In stop mode, press PBC. TM On TV screen, "PBC OFF" will be displayed shortly. [. . . ] Always pick up the CD by the edge and replace the CD back in its box after use to avoid scratching and dust. · To clean the CD, wipe in a straight line from the centre towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. · Never write on a CD or attach stickers to it. TAPE DECK MAINTENANCE To ensure a good recording and playback of the tape deck, clean parts A, B and C show in the diagram below, after approx. [. . . ]