User manual PHILIPS AZ2808

[. . . ] Make sure you remove the mains plug from the set and wall socket before inserting batteries. Open the battery compartment and insert 8 batteries, type R-20, UM-1 or D-cells, (preferably alkaline) with the correct polarity as indicated by the "+" and "­" symbols inside the compartment. Remote control (supplied for AZ 2025 model only) Open the battery compartment and insert two batteries, type AAA, R03 or UM4 (preferably alkaline). Replace the compartment door, making sure the batteries are firmly and correctly in place. [. . . ] TM If a FM station is received in stereo, STEREO is shown. Repeat step 3 if necessary until you find the desired station. · To tune to a weak station, press SEARCH or § briefly and repeatedly until you have found optimal reception. To improve radio reception ­ For FM, pull out the telescopic aerial. Reduce its length if the signal is too strong (very close to a transmitter). ­ For MW (LW), the set is provided with a built-in aerial so the telescopic aerial is not needed. Direct the aerial by turning the whole set. BATT OW 7 English GENERAL INFORMATION DIGITAL TUNER Programming radio stations You can store up to a total of 30 radio stations in the memory. Tune to your desired station (see Tuning to radio stations). Press PRESET 4 or 3 once or more to allocate a number from 1 to 30 to this station. Press PROGRAM again to confirm the setting. ­ Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown. The play modes can also be combined with PROGRAM. SHUFFLE - tracks of the entire CD/ programme are played in random order SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme continuously in random order REPEAT ALL - to repeat the entire CD/ programme REPEAT - to play the current track continuously 1. To select your play mode, press CD MODE on the set (or for AZ 2025 model only: press SHUFFLE or REPEAT on the remote control) before or during playback until the display shows the desired function. Press PLAY·PAUSE 2; to start playback if in the STOP position. To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE/ REPEAT modes are no longer displayed. ­ You can also press STOP 9 to cancel your play mode. Note: In SHUFFLE mode, the display shows rapid patterns e. g. , when the CD player selects a random track number. 9 CD PLAYER Programming track numbers In the STOP position, select and store your CD tracks in the desired sequence. If you like, store any track more than once. Up to 20 tracks can be stored in the memory. Use the SEARCH or § on the set, (for AZ 2025 model only: on the remote control ¡ or TM) to select your desired track number. [. . . ] Do not use cleaning agents as they may damage the disc. · Never write on a CD or attach any stickers to it. TM The display shows tAPE throughout tape operation. Press STOP·OPEN 9/ to open the cassette door. [. . . ]