User manual PHILIPS AZ5130/00C

[. . . ] VCD MP3 CD Soundmachine AZ5130 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio AZ5130, Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] TM PROG will start flashing and " P01" will be displayed. TM On TV screen, "PROG" program list (5 lines per page) will be displayed. Press digits 0 - 9 on the remote control or ¡ / TM to select the desired album. The number "AXX" represents the album no. Press / § repeatedly (or digits 0 - 9 on the remote control) to select the desired TRACK for programming. · Repeat steps 1 to 5 to store other desired album and track. · Press PROG in stop mode can review the programme sequence. You can press / § to select the programmed track to play. Press 9 once stop programme playback or twice to clear the programme. English 12 CD/VCD/MP3-CD You can play all the tracks in random order. During playing, pause or stop mode, press SHUFFLE to enable SHUFFLE play mode. To exit shuffle mode, press SHUFFLE again or 9. TM SHUFFLE will disappear from the display. Note : - If the Shuffle function enabled, and the Repeat function is set on, will disable the Shuffle play mode. English SHUFFLE REPEAT You can play the current track or the whole disc repeatedly. During CD/ MP3-CD playing or pause mode, press REPEAT on the remote control or on the set. TM REPEAT icon - to repeat the current track. TM REPEAT ALL icon all- to repeat the whole disc. To exit the repeat mode, press REPEAT until the REPEAT/REPEAT ALL icon disappears from the display. Notes : - If the Repeat function is enable, and the Shuffle function is set on, will disable all the Repeat play modes. - If the Repeat function is enable, and the Stop button is pressed, will disable all the Repeat play modes. VIDEO CD Adjusting the TV System Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system of your TV set (exception Multi - system TV). On the remote control, press NTSC/PAL to switch between NTSC and PAL TV system. OSD - On Screen Display If you insert VCD/CD, your TV screen will serve as an additional display for messages (e. g. PLAY, STOP), and information stored on the VCD/CD. · Press OSD on the remote control to select viewing various information. [. . . ] 50 hours of operation, or on average once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck. · Open the cassette holder by pressing STOP·OPEN 9 /. · Press PLAY 1 and clean the rubber pressure rollers C. [. . . ]