User manual PHILIPS AZ6000

[. . . ] DAB CD Soundmachine AZ6000 User manual 1 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] Sort the list of available stations by Fav station (See Fav station, SORTING STATIONS). = 1st display line: the last station you tune to 2nd display line: a list of available stations, favorite stations in the front, followed by other stations. Go back to DAB MENU and select Station order (See Fav station, SORTING STATIONS). Press left/right 1, 2 once or more (or 5, 6 on the remote control) and then, ENTER to select - > presets from the option list. = All the favorite stations are stored in the preset locations starting from preset 1, overwriting the presets in the respective locations. Helpful hints: - If you wish to keep your original autostore presets, always select Fav station option when using Station order sorting. Select your desired station (See SELECTING A STATION) = The name of current station is shown in the 1st display line. The broadcasting text, if available, scrolls in the 2nd display line (DLS in default setting). Press PROG (make sure you have selected your desired station and the list of stations has disappeared from the 2nd display line) = Display shows: current station name at the top display line and the stations saved in program locations at the bottom. Press PRESET 3, 4 (or PRESET -, + on the remote control) once or more to find a free location to store your new station. = Display: Preset X saved when a station is successfully saved (where X denotes a preset station number). Helpful hints: - You can erase a preset station by storing another freqency in its place. - If you have saved presets using both Autostore and Manual programming, always select Fav station option when using Station order sorting. MODE PRESET ENTER DBB DAB MENU SMART SCAN PROG 12 DAB RADIO RECALLING A PRESET 1. Press PRESET 3, 4 (or PRESET -, + on the remote control) once or more to find your desired preset. = Display shows: current station name at the top display line and available presets at the bottom. = Your desired preset radio station plays. PRESET ENTER VIEWING THE SERVICE INFO You can view the DAB service info in the following 7 information modes. Depending on the DAB radio station you are tuning to, some information modes may be unavailable. · To scroll through the information options, press MODE repeatedly until your desired option appears. = 1st display line: current station name DBB DAB MENU MODE SMART SCAN PROG 2nd display line: selected service info 1. DLS (Dynamic Label Segments) ­ Displays the scrolling broadcasting text (in default setting). Multiplex Name ­ Describes content type (e. g. jazz, pop) ­ Specifies the multiplex of current service. (A multiplex is a group of stations broadcast by a multiplex operator. ) ­ Shows the date & time of current multiplex. [. . . ] Helpful hints: - During programming, if no action is executed within 10 seconds, will appear and programming stops automatically. Reviewing the program After appears, you can review all the songs you have programmed in the program stop position. · If necessary, press 9 to enter the stop position. · Press and hold PROG until the display shows all your stored track numbers in sequence. [. . . ]