User manual PHILIPS AZ7267

[. . . ] With this player you can use either: · Notes: ­ Old and new or different types of batteries should not be used in combination. ­ Remove batteries if they are empty or if the player is not going to be used for a long time. Battery indication The battery symbol on the display is divided into 3 sections which indicate the approximate power capacity of the batteries. Average playing time of batteries under normal conditions Battery type ESP on Normal 7 hours Alkaline 20 hours ECO-PLUS NiMH batteries (not on all versions) 10 hours ESP off 6 hours 18 hours 9 hours Rechargeable ECO-PLUS NiMH batteries AY 3362 only) Recharging works only on players with supplied rechargeable ECO-PLUS NiMH batteries AY 3362. [. . . ] ⷠTo remove the CD, hold it by its edge and press the hub gently while lifting the CD. Note: If there is no activity, the set will automatically switch off after a while to save energy. In that case use FINALIZE on your CD recorder to complete the recording. ⷠIf you want to play a rewritable CD (CD-RW), it takes 3­15 seconds for sound reproduction to start once you have pressed 2;. While the CD is read, 1 -:- is displayed. Bass adjustment You can choose between the bass enhancement levels dbb1 and dbb2. 1 Press DIGITAL DBB as often as necessary to select the desired bass intensity. Briefly press or § once or several times to skip to the current, previous or next track. Y Playback continues with the selected track and its number is displayed. Selecting a track when playback is stopped 1 Briefly press or § once or several times. Searching for a passage during playback 1 Keep or § pressed to find a particular passage in a backward or forward direction. y SHUFFLE REPEAT ALL: All tracks of the CD are played repeatedly in random order. Y REPEAT: The current track is played repeatedly. Y REPEAT ALL: The entire CD is played repeatedly. Y SCAN: The first 10 seconds of each of the remaining tracks are played in sequence. 2 Playback starts in the chosen mode after 2 seconds. MODE repeatedly until the display indicator goes off. You can tune to any FM or MW station automatically or manually. Y The radio tunes to a station with sufficient strength and radio play starts. 2 Release 3 or 4, then briefly press 3 or 4 again when you are close to the desired frequency. To switch from radio play to CD play press 2;. 2 Press or § if necessary repeatedly to select the number that should be assigned to this radio station. [. . . ] At the set alarm time either the tuner will start playing for 1 hour, the beeper will come on for 3 minutes or an entire CD will be played. 1 Keep SET· Pressed for approximately 2 seconds, then briefly press SET· 2 Press 3 or 4 if necessary repeatedly within 5 seconds to select the desired alarm signal until the display shows either: ALbEEP: the beeper will be the alarm signal, ALCd: the CD will be the alarm signal, or ALtun: the tuner will be the alarm signal. You can deactivate the beeper for 24 hours by pressing any key on the player. ⷠIf you deactivate the alarm function by switching CD or tuner play off with 9, CD or tuner play will restart after 24 hours. [. . . ]