User manual PHILIPS AZ8048

[. . . ] If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note:The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). [. . . ] To tune to a weak station, press or § briefly and repeatedly until you have found optimal reception. To improve radio reception: · For FM, extend, incline and turn the telescopic aerial. Reduce its length if the signal is too strong. · For MW (AM or LW), the set uses a built-in aerial. Direct this aerial by turning the whole set. Programming radio stations You can store up to a total of 40 radio stations in the memory, manually or automatically (Autostore). Tune to your desired station (see Tuning to radio stations). Use the digit panel on the set to key in a number, 1-40, to select a preset station. press 1, 1 if you want to store your station as preset 11. (See 4) · Remote control (AZ1505 models only): Press PRESET + / once or more to select a preset station. Repeat steps 1-4 to store other stations. To stop CD playback, press the 9 button. Note : CD play will also stop when: - the CD-tape door is opened - the CD has reached the end - you select TAPE or RADIO function. Selecting a different track There are 2 ways: CD PLAYER Direct Easy Access · Key in the number of the track using the digit panel on the set. SEARCH or § · Press SEARCH or § once or repeatedly to select your track. ­ The CD is played at high speed and low volume. When you recognize the passage you want, release or § to resume normal playback. Note : During a CD program or if SHUFFLE/ REPEAT active, searching is only possible within a track. Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback, and combine the modes with PROGRAM. (See 5) SHUFFLE - tracks of the entire CD/ program are played in random order SHUFFLE REPEAT ALL - to repeat the entire CD/ program continuously in random order REPEAT ALL - repeats the entire CD/ program REPEAT - plays the current track continuously CD PLAYER 3. Repeat steps 1-2 to select and store all desired tracks. TM Display: FULL if you try to program more than 20 tracks. Reviewing the program In the stop position, press and hold PROGRAM until the display shows all your stored track numbers in sequence. [. . . ] Tune to the desired radio station (see Tuning to radio stations). Follow steps 3-6, under CD Synchro Start Recording. 1. To select play mode, press MODE once or more. Press 2; to start playback if in the stop position. [. . . ]