User manual PHILIPS AZ8075/00S

[. . . ] When inserting new batteries, do not try to mix old batteries with the new ones. Check if the AC power supply, as shown on the type plate located on the bottom of the set, corresponds to your local power supply. If it does not, consult your dealer or service centre. Connect the mains lead to the wall socket. [. . . ] (See 4) · Remote control (AZ8075/00S models only): Press PRESET + / once or more to select a preset station. Repeat steps 1-4 to store other stations. Note : You can erase a preset station by storing another frequency in its place. CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. This set complies with the radio interference requirements of the European Community. POWER SUPPLY Whenever convenient, use the AC power supply to conserve battery life. Make sure you remove the power plug from the set and wall outlet before inserting batteries. batteries (not included) · Insert 6 batteries, type R-14, UM-2 or C-cells, (preferably alkaline) with the correct polarity. To switch off, adjust the POWER slider to select TAPE/OFF and make sure all the cassette keys are released. Press DBB once or more to select dynamic bass boost on or off. Autostore Autostore automatically starts programming radio stations from preset 1. Insert a suitable tape into the cassette deck and close the door. ­ Playing of the CD program starts automatically from the beginning of the program. You don't need to start the CD player separately. TM To select and record a particular passage within a CD track: · press SEARCH or §. Release the control when you recognize the passage you want. Recording starts from this exact point in the track when you press RECORD 0. To select play mode, press MODE once or more. To select normal playback, press MODE repeatedly until the various modes are no longer displayed. ­ You can also press the 9 button to cancel your play mode. Programming track numbers In the stop position, select and store your CD tracks in the desired sequence. Press SEARCH or § on the set to select your desired track number. [. . . ] Do not use cleaning agents as they may damage the disc. ⷠNever write on a CD or attach any stickers to it. Tape deck maintenance To ensure quality recording and playback of the tape deck, clean parts A, B and C as shown, once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck. [. . . ]