User manual PHILIPS AZUR ELITE

[. . . ] Temperature setting Select the temperature to the appropriate setting for your garment according to table 1 below: Table 1: Fabric type Linen Cotton Wool Silk Synthetic fabric (e. Acrylic, nylon, polyamide, polyester) Temperature setting MAX ●●● ●● ●● ● Automatically adjusted to no steam Auto steam control Steam boost Yes Yes No No No Automatically adjusted to the optimal amount ENGLISH Steam setting 7 -- Auto steam: The iron automatically adjusts the steam output according to the selected temperature to provide the best ironing result. -- ECO: This steam setting enables you to reduce the steam output to save energy and still have sufficient steam to iron your garments. -- Dry: This steam setting enables you to iron without steam or to stop steam when the iron is not in use. [. . . ] If water in your area is very hard, use this function more frequently. Note: Make sure that the iron has been unplugged for at least 1 hour and has completely cooled down, before you use Quick Calc Release. 1 Put the iron on a levelled surface and push up the Quick Calc Release lock at the back of the iron (Fig. 3  our out scales in the tray into a sink or dustbin. Remove any P excess water from the tray (Fig. Do not pour water, vinegar, descaling agents or other chemicals into the iron from the opening of the Quick Calc Release. Do not use vinegar, descaling agents or other chemicals to wash the tray. 4 Wipe off the scales in the opening of the Quick Calc Release tray with a damp cloth (Fig. 5 Insert the tray back into the iron (Fig. 6 Push down the Quick Calc Release lock (Fig. Do not use the iron when the Quick Calc Release tray is not locked. If you break or lose the tray, contact a consumer care center in your country (see the worldwide guarantee leaflet for contact details). Calc-clean function IMPORTANT: Besides Quick Calc Release function, you should also perform calc-clean once every 1 month to prolong the life of your iron. If water in your area is very hard, or you see scales coming out from the soleplate during ironing, use this function more frequently. 1 Make sure the iron is unplugged and the steam slider is set to dry setting. 2 Fill the water tank to the MAX indication. Do not pour vinegar or other descaling agents into the water tank. 3 Plug in the iron and set the temperature dial to MAX. 4 Unplug the iron when the temperature light goes out. Keep pushing the calc clean button and gently shake the iron forth and  back until all water in the water tank has been used up (Fig. Scales is flushed out, steam and boiling water also come out of the soleplate. Note: Repeat steps 2 to 5 if the water that comes out of the iron still contains scale particles. [. . . ] Use a piece of cloth to wipe off calc in the opening of the back part of the iron. (See chapter ‘Cleaning and maintenance’ , section ‘Quick calc release function’). Contact a consumer care center in your country (see the world wide guarantee leaflet for contact details). The steam boost function does not work properly (water leaks out of the soleplate). [. . . ]