User manual PHILIPS BDL5545ET

[. . . ] BDL5545ET http://www. publicsignagesolutions. philips. com User Manual (English) User Manual BDL5545ET SAFETY INSTRUCTIONS WARNINGS AND PRECAUTIONS KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. [. . . ] Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. Press the PLUS button to expand the width of the image, or press the MINUS button to shrink the width of the image. Adjust to improve the focus, clarity and stability of the image. Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. Zoom mode The pictures you receive may be transmitted in 16:9 format (widescreen) or 4:3 format (conventional screen). 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function allows you to optimize the picture display on screen. The following zoom modes are available for PC mode: Full, Normal, Custom, Real and 21:9. Video mode: Full, Normal, Dynamic, Custom, Real and 21:9. 33 User Manual BDL5545ET x Full - This mode restores the correct proportions of pictures transmitted in 16:9 using the full screen display. x Normal - The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. x Dynamic - Fill the entire screen by stretching 4:3 pictures non-proportionally. x Custom - Choose to apply the custom zoom settings in the Custom Zoom submenu. x Real - This mode displays the image pixel-by-pixel on screen without scaling the original image size. x 21:9 - The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). Custom zoom Note: This item is only available when the Zoom mode setting is set to Custom. You can use this function to further customize the zoom settings to suit the image you want to display. Press the SET/PLUS button to open the submenu. Use the UP/DOWN button to toggle between the following items, and use the PLUS/MINUS button to adjust. x Zoom - Expands the horizontal and vertical sizes of the image simultaneously. x H zoom - Expands the horizontal size of the image only. x V zoom - Expands the vertical size of the image only. x H position - Moves the horizontal position of the image left or right. x V position - Moves the vertical position of the image up or down. Screen reset Reset all settings in the Screen menu. Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make selection. [. . . ] the display or audible noise is heard Color is abnormal Picture is distorted with abnormal patterns The signal cable is not connected properly. 1. The signal cable is not connected properly. Make sure that the signal cable is attached 2. The input signal is beyond the capabilities firmly. [. . . ]