User manual PHILIPS BDL5551EL

[. . . ] BDL5551EL www. philips. com/welcome User Manual (English) BDL5551EL Safety Instructions Warnings and Precautions KNOW THESE SAFETY SYMBOLS CAUTION:  REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). TO REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. Note to CATV system installers: This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. CAUTION:  FCC/CSA regulations state that any unauthorized changes or modifications to this equipment may void the user’s authority to operate it. [. . . ] • Video mode: {Full} / {Normal} / {Dynamic} / {Custom} / {Real} / {21:9}. Full This mode restores the correct proportions of pictures transmitted in 16:9 using the full screen display. Normal The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. Dynamic Picture reset Reset all settings in the Picture menu. Fill the entire screen by stretching 4:3 pictures non-proportionally. Custom Real 4. 2. 2. Screen menu Picture Screen Audio PIP Configuration1 Configuration2 Advanced option H position V position Clock Clock phase Zoom mode Custom zoom Screen reset Choose to apply the custom zoom settings in the Custom Zoom submenu. This mode displays the image pixel-by-pixel on screen without scaling the original image size. 21:9 The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). Custom zoom You can use this function to further customize the zoom settings to suit the image you want to display. H position Press the [ ] button to move the image to the right, or [ ] to move the image to the left. NOTE:  This item is functional for all inputs except HDMI, Card OPS, and DP in video mode. V position Press the [ ] button to move the image up, or [ ] to move the image down. NOTE:  This item is functional for all inputs except HDMI, Card OPS, and DP in video mode. NOTE:  This item is functional for VGA input only. NOTE:  This item is functional only when the Zoom mode setting is set to Custom. Zoom Expands the horizontal and vertical sizes of the image simultaneously. H zoom Expands the horizontal size of the image only. V zoom Expands the vertical size of the image only. 17 BDL5551EL H position Choose from: {HDMI} / {Audio1} / {Audio2}. Audio reset Reset all settings in the Audio menu to factory preset values. Card OPS audio Select the analog or digital audio mode for card OPS. Moves the horizontal position of the image left or right. V position Moves the vertical position of the image up or down. Screen reset Reset all settings in the Screen menu to factory preset values. 4. 2. 4. PIP menu Picture Screen Audio PIP Configuration1 Configuration2 Advanced option PIP PIP input PIP change PIP size PIP audio PIP reset 4. 2. 3. Audio menu Picture Screen Audio PIP Configuration1 Configuration2 Advanced option Balance Treble Bass Volume Maximum volume Minimum volume Mute Audio source Audio reset Card OPS audio PIP Select the PIP (Picture-in-Picture) mode. Choose from: {Off} / {PIP} / {POP} / {PBP aspect} / {PBP full}. PIP input Balance Adjust to emphasize left or right audio output balance. Treble Adjust to increase or decrease higher-pitched sounds. Bass Adjust to increase or decrease lower-pitched sounds. Volume Adjust to increase or decrease the audio output level. Maximum volume Adjust your own limitation for the maximum volume setting. This stops the volume from being playing at too loud a level. Minimum volume Adjust your own limitation for the minimum volume setting. Audio source Select the audio input source according to the audio signal source connected to the audio input and HDMI sockets on the display.          Select the input signal for the sub-picture. PIP change Enlarges the smaller picture to become the main picture, and vice versa. [. . . ] 2. The main power switch on the back of the display is not switched on. 3. The selected input has no connection. 2. Make sure the power switch is switched on. 3. Connect a signal connection to the display. Symptom No picture is displayed Interference displayed on the display or audible noise is heard Color is abnormal Picture is distorted with abnormal patterns Caused by surrounding electrical appliances or fluorescent lights. [. . . ]