User manual PHILIPS BDL5571V

[. . . ] BDL5571V www. philips. com/welcome User Manual (English) User Manual BDL5571V SAFETY INSTRUCTIONS WARNINGS AND PRECAUTIONS KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. [. . . ] Color temperature Select a color temperature for the image. The image looks reddish with a lower color temperature, and looks bluish with a higher color temperature. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between 5000K 6500K 7500K 9300K 10000K Native User Color control Note: This function is only available when Color temperature is set to User. With this function you can adjust the color tones of the image precisely by changing the R (Red), G (Green) and B (Blue) settings independently. Press the SET/PLUS button to open the submenu. Press the UP/DOWN button to select User-R, User-G or User-B, and press the PLUS/MINUS button to adjust. Light sensor Choose to enable or disable the ambient light sensor. Once enabled, the image brightness will be adjusted automatically when ambient lighting condition changes. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make selection. Smart contrast When turned on, this function helps enhance image contrast when displaying dark scenes. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make selection. 32 User Manual BDL5571V Smart picture The following smart picture modes are available for PC mode: Standard, Highbright and sRGB. Video mode: Standard, Highbright and Cinema. Video source Select a video input source. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between Display Port DVI-D Card DVI-D VGA HDMI YPbPr(Componment) Picture reset Reset all settings in the Picture menu. Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make selection. Select Reset and press the SET button to restore settings to factory preset values. Press the EXIT button or select Cancel and press the SET button to cancel and then return to the previous menu. 33 User Manual BDL5571V 4. 2. 2. SCREEN MENU H position Adjust the horizontal placement of the picture. Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. Press the PLUS button to move the image to the right, or press the MINUS button to move the image to the left. V position Adjust the vertical placement of the picture. Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. [. . . ] noise is heard Color is abnormal Picture is distorted with abnormal patterns The signal cable is not connected properly. 1. The signal cable is not connected properly. Make sure that the signal cable is attached 2. The input signal is beyond the capabilities firmly. [. . . ]