User manual PHILIPS BDP2500

[. . . ] Register your product and get support at www. philips. com/welcome BDP2500 EN User manual Important notes for users in U. K. Mains plug This apparatus is fitted with an approved moulded plug. Should it become necessary to replace the main fuse, this must be replaced with a fuse of same value as indicated on the plug (example 10A). The replacement fuse must comply with BS1362 and have the A. S. T. A. [. . . ] · [On] - PCM audio is down-sampled at 48kHz. · [Off] - For BD or DVD recorded in LPCM without copyright protection, two-channel audio signals up to 96 kHz are output as LPCM signals with no conversion. Preference Setup 1 2 3 Press . Select [Preference Setup], then press . Menu Language Parental Control Audio Setup Preference Setup Display Panel EasyLink Setup Advanced Setup Auto Standby VCD PBC Screen Saver Change Password Normal On On English Off Off Video Setup 4 5 Select an option, then press OK. · To return to the previous menu, press · To exit the menu, press . [Menu Language] Select an on-screen menu language. BACK. Note · If this product is connected to an HDMI CEC compliant TV using a HDMI cable, it switches automatically to the same menu display language as per your TV setting (if the language set on TV is supported by this product). [Parental Control] Restrict access to discs that are unsuitable for children. These types of discs must be recorded with ratings. To access, enter your last set password or `0000'. Note · Rated discs above the level you set in [Parental Control] require a password to be played. · The ratings are country-dependent. To allow all discs to play, select ` 8' for DVD-video and BD-Video. · Some discs have ratings printed on them but are not recorded with ratings. This function has no effect on such discs. [Screen Saver] Turn on or off the screen saver mode. It helps to protect the TV screen from being damaged due to over exposure to static image for being too long. · [On] - Set the screen saver active after 10 minutes of inactivity (for example, in the pause or stop mode) · [Off] - Disable screen saver mode. [Change Password] Set or change the password. 1) Press the Numeric buttons to enter the password or your last set password. If you forget the password, enter `0000', then press OK. 4) Move to [Confirm] in the menu and press OK. [Display Panel] Select a brightness level of the front panel display. [Auto Standby] Turn on or off auto standby mode. · [On] - Switch to standby after 30 minutes of inactivity (for example, in pause or stop mode). · [Off] - Disable auto standby mode. [. . . ] Philips provides the Software `as is' and without any warranty except that the Software will perform substantially in accordance with the documentation accompanying the Software for a period of one year after your first download, installation or use of the Software, whichever occurs first. Philips' entire liability and your exclusive remedy for breach of this warranty shall be, at Philips' option, either (i) return of the price paid by you for the Software (if any); or (b) repair or replacement of the Software that does not meet the warranty set forth herein and that is returned to Philips with a copy of your receipt. This limited warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongful application. Any replacement Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. [. . . ]