User manual PHILIPS BDS4221

[. . . ] Philips Business Solutions E G I User Manual Benützersanleitung S 42" Plasma Monitor TYPE NR. BDS4221 Important Safety Instructions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove the front or back covers. Refer servicing to qualified service personnel only. The lightning flash with arrow-head within a triangle is intended to inform the user that parts inside the product are a risk of electric shock. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are explained. Special Notices !! Certain programs may be copyrighted and any unauthorized recording in whole or in part may be in violation of copyright laws in the U. S. [. . . ] Increase in the right direction will shift the picture with more green in appearance. Decreasing setting in left direction will shift the picture with more red in appearance. SHARPNESS Use sharpness to adjust the amount of detail enhancement to the cideo picture. Increasing the setting will enhance the edges of objucts in the video picture. Decreasing the setting will reduce enhancement. TONE Select the color temperature for white balance. There are three settings to choose from : Cold, Neutral, Warm. AUTO FORMAT Use to turn on the auto format of screen or turn off. System will determine the format according to the signal when you turn on the auto format, otherwise, the screen will remain in 16:9. V-SIZE Use to change vertical size of the picture. Increase to enlarge the picture size in the vertical direction. Decrease to reduce the picture size in the vertical direction. V-POSITION Use to change vertical position of the picture. H-SIZE Use to change horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction. Decrease to redice the picture size in the horizontal direction. H-POSITION Use to change horizontal position of the picture. Increase to shift the picture to the right. Decrease to shift the picture to the left. CLOCK PHASE Use clock phase to fine-tune the monitor to perfectly synchronize to the video signal source under RGB mode. Notes: !H-Position, H-Size and V-Position adjustments are only available in RGB, DVI, and Component input modes higher than 480i. When using Component inputs with Y Cb/Cr signals, H-Size, H-Position, V-Size, V-Position settings are not available. 29 Picture Controls Picture-in-Picture / Side-by-Side Picture Turning On PIP/Side-by-Side Picture (POP) PIP and POP modes allow users to view two video input sources simultaneously. [. . . ] The position of the selection switch does not correspond to the selected selected input. Some pixels of the plasma display may not turn on. Some picture elements do not light up. After-Images can be seen on the monitor after it has been powered off. (Examples of still pictures include logos, video games, computer images, and images displayed in 4: 3 format) 1. A still picture was displayed for an extended period of time. 52 Appendix Wall Mount Instructions Empty contents of the package. [. . . ]