User manual PHILIPS BDS4222R

[. . . ] Philips Business Solutions EN User Manual TYPE Nr. BDS4222B BDS4222V BDS4222R User Manual BDS4222B/V/R TABLE OF CONTENTS 1 IMPORTANT NOTES AND SAFETY INSTRUCTIONS . 5 1. 2. 1 Note to the CATV System Installer. 6 1. 1 1. 2 2 3 REGULAROTY NOTICE . . 7 3. 1 3. 2 3. 3 UNPACKING AND INSTALLATION . [. . . ] Please use the following procedures to adjust the picture size and position. 1 Press the MENU key on the monitor panel or remote control. or ADJ key to select the PICTURE option from 3 Use the SEL or SEL key to select V-SIZE, V-POSITION, H-SIZE or H-POSITION from the menu. 7600 K 0 4 Press the ADJ or ADJ key to change the setting so that your video picture is best fit within the display area of the monitor. 5 Repeat the procedure for the V-Size, V-Position, H-Size and HPosition settings until video picture is fully displayed within the monitor's display area. 6 Press EXIT to close the OSD screen. 33 User Manual BDS4222B/V/R 7. 2 7. 2. 1 SOUND CONTROLS ADJUSTING SOUND SETTINGS Various sound adjustments can be set using the Sound Adjustment OSD menu. 1 Press the MENU key on the monitor panel or remote control. 2 Use the ADJ or ADJ key to select the SOUND option from the menu. => Various sound settings are available from the SOUND menu. 4 Press the ADJ or SEL or ADJ key to select the option that you wish to key to change the setting. or 5 Press the EXIT key to close the OSD screen, or press the SEL SEL key to keep adjusting. Explanation of Various Sound Control Settings . BASS Adjusts the BASS level of the sound. For more bass response, increase the BASS level. TREBLE Adjusts the TREBLE level of the sound. For more vocal and high frequency response, increase the TREBLE level. . BALANCE Adjusts the BALANCE level between LEFT and RIGHT channels. SPEAKER Sets the speakers to ON to turn on the speakers or sets the speakers to OFF to turn off. This setting will not affect AUDIO OUTPUT jacks. AUDIO OUTPUT Sets the type of audio output sent from the audio output jacks located in the rear of monitor. When set to VARIABLE, audio output is affected by the monitor's internal volume controls . When set to FIXED, the audio output bypasses the monitor's internal audio control so that functions such as bass, treble and volume controls have no effect. 34 User Manual BDS4222B/V/R 7. 2. 2 BUILT-IN AMPLIFICATION (SPEAKER) Turning On Built-in Amplification This monitor is equipped with a built-in amplication for optional external speakers. You can switch the amplification ON or OFF using the OSD. Because these speakers are general purpose, you may consider switching them OFF during hi-fidelity playback of movies or other content. 1 Press the MENU key on the monitor panel or remote control. 4 Press the ADJ or ADJ or SEL or ADJ key to select the SOUND option from key to select the INTERN. [. . . ] a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted. ) modifications or adaptations to enable the product to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or the repair of products damaged by these modifications. [. . . ]