User manual PHILIPS BT9280

[. . . ] Always here to help you Register your product and get support at www. νικα 39 Español 51 Suomi 62 Français 72 Italiano 83 Nederlands 94 Norsk 105 Português 115 Svenska 126 Türkçe 136 BT9295, BT9290, BT9280 6 English Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. €1) 1 Precision trimming comb 2 Standard trimming comb 3 Turnable trimming head 4 Laser guide 5 Guiding groove for trimming comb 6 Length setting display 7 Zoom wheel for length setting 8 On/off button 9 Battery lights 10 Socket for small plug 11 Adapter 12 Small plug 13 Cleaning brush 14 Storage pouch (BT925/BT9290 only) Important Read this user manual carefully before you use the appliance and save it for future reference. [. . . ] 6in) side of the trimming head allows more precise styling and contouring than the 32mm (1. 1 If one of the combs is still on the trimming head, pull it off. Never pull at the flexible top of the comb. 2 Turn the trimming head until the side you want to use points to the front of the appliance. English 3 Press the on/off button to switch on the appliance. 4 Hold the appliance in the position that is most convenient for the area you want to trim and make strokes in the desired direction. Tip: For a comfortable trim close to your skin, place the flat side of the trimming head against your skin and make strokes in the desired direction. 5 When you are finished, press the on/off button to switch off the appliance. Trimming with comb The appliance comes with two combs: a standard comb and a precision comb. These combs keep the trimming head at a certain distance from your skin. This distance determines the remaining hair length and can be adjusted by turning the zoom wheel. -- Use the standard comb to trim your beard. 11 -- Use the precision comb to trim hard-to-reach areas, for instance under your nose. 1 Slide the comb into the guiding grooves on both sides of the appliance (‘click’). Note:The comb does not fit on the trimming head when the 15mm (0. 6in) side is pointing towards the front of the appliance. If this is the case, turn the trimming head before you slide the comb onto the trimming head. 2 Turn the zoom wheel to select a length setting. -- The length setting selected lights up on the front of the appliance. 4mm to 7mm (see table in section ‘Length settings’ below). 12 English 3 Press the on/off button to switch on the appliance. 4 To trim your beard,  move the trimming comb through the hair slowly. [. . . ] Nevertheless, we advise you not to stare into the light and to avoid shining the light directly into your eyes. You have to push the laser guide to ‘off ’ position before you can turn the trimming head. 15 Can I clean this appliance The appliance is watertight and you can clean it under a running tap with under a running tap?Tip: To prevent condensation on the laser window of the laser guide, we advise you not to rinse the appliance under the tap. [. . . ]