User manual PHILIPS BTM630

[. . . ] Bluetooth Wireless Micro System Register your product and get support at BTM630 www. philips. com/welcome User manual CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. 2 Philips Consumer Electronics 3 Contents English 4 General Information Environmental Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5~6 Hearing Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Repeat step 2 if necessary until you find the desired station. Tune to your desired station (refer to "Tuning to radio stations"). Press PROG on the system (or PROG/ CLOCK on the remote control) to activate programming. Press ALBUM · PRESET +/- on the system (or 3 / 4 on the remote control) to allocate a number from 1 to 40 to this station. Press PROG on the system (or PROG/ CLOCK on the remote control) again to confirm the setting. PROG disappears, the preset number and the frequency of the preset station are shown. Repeat the above four steps to store other stations. 3 4 3 To tune to a weak station, press S/T on the system (or 5 /6 on the remote control) briefly and repeatedly until you have found optimal reception. 5 You can override a preset station by storing another frequency in its place. 17 English Radio Reception English Tuning to preset radio stations Press ALBUM · PRESET +/- on the system (or 3 / 4 on the remote control) until the desired preset station is displayed. RDS Radio Data System is a service that allows FM stations to show additional information. If you are receiving a RDS station, and the station name are displayed. When automatic programming is used, RDS stations will be programmed first. Scrolling through different RDS information Press RDS on the remote control briefly and repeatedly to scroll through the following information (if available): ­ Station name ­ Radio text messages ­ Program type ­ Frequency 18 External Sources Using a non-USB device 1 Use the supplied Aux-in cable to connect the AUX jack (3. 5mm, located on the top panel) to an AUDIO OUT or headphone jack on an external device (such as TV, Laser Disc player, DVD player or CD recorder). Press SOURCE on the system repeatedly (or AUX on the remote control) to select external equipment. Note: ­ All the sound control features (DSC or DBB, for example) are available for selection. ­ Refer to the operating instructions for the connected equipment for details. b) If your Mass storage device required a battery/ power source. Please make sure you have a fresh battery in it or charge the USB device first and then plug it into the product again. ­ Supported Music type: a) This device only supports unprotected music with the following file extension: . mp3 . wma b) Music bought from on-line music stores are not supported because they are secured by Digital Rights Management protection (DRM). c) File name extensions that end with the following are not supported: . wav; . m4a; . m4p; mp4; . aac and etc. ­ No Direct connection can be made from Computer USB port to the product even you have either or both mp3 or wma files in your computer. Supported formats: ­ USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 bytes) ­ MP3 bit rate (data rate): 32-320 Kbps and variable bit rate ­ WMA v9 or earlier ­ Directory nesting up to a maximum of 8 levels ­ Number of albums/ folders: maximum 99 ­ Number of tracks/titles: maximum 400 ­ ID3 tag v2. 0 or later ­ File name in Unicode UTF8 (maximum length: 128 bytes) The system will not play or support the following: ­ Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display. ­ Non-supported file formats are skipped. This means that e. g. : Word documents . doc or MP3 files with extension . dlf are ignored and will not be played. ­ AAC, WAV, PCM audio files ­ DRM protected WMA files ­ WMA files in Lossless format 2 Using a USB mass storage device/SD/MMC memory card By connecting a USB mass storage device or SD/ MMC memory card to the Hi-Fi system, you can enjoy the device's or card's stored music through the powerful speakers of Hi-Fi system. Playing a USB mass storage device/SD/ MMC memory card Compatible mass storage devices/cards With the Hi-Fi system, you can use: ­ USB flash memory (USB 2. 0 or USB1. 1) ­ USB flash players (USB 2. 0 or USB1. 1) ­ SD/MMC memory cards Notes: ­ In some USB flash players (or memory devices), the stored contents are recorded using copyright protection technology. [. . . ] Use a finalised CD-RW or correct format disc. Radio reception is poor. If the signal is too weak, adjust the antenna or connect an external antenna for better reception. Increase the distance between the Micro HiFi System and your TV or VCR. The system does not react when buttons are pressed. Sound cannot be heard or is of poor quality. Remove and reconnect the AC power plug and switch on the system again. Adjust the volume. [. . . ]