User manual PHILIPS CD RECORDER MINI CDR560BK98

[. . . ] Read Instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Follow Instructions - All operating and use instructions should be followed. Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like. [. . . ] Lights when trying to record digital protected audio !Player is reading disc information OPC . No recordings on disc, finalizing not possible NO AUDIO (flashing) no audio disc loaded or failure to read data FINAL . Laser power calibration performed 96 times, finalize disc COAXIAL . Flashes during unfinalize disc standby, lights during unfinalize disc INPUT . The CD recorder has the following playback outputs: - Digital coaxial output - Analogue output The connections to be made depend upon the possibilities your audio equipment offers. If your equipment does not offer digital connections, the high quality Analogue-Digital-Converter of your CD recorder will ensure high audio performance when recordings are made from the analogue input. playback via the digital coaxial output of the CD recorder gives the best audio performance. If your equipment does not offer digital connections the high quality Digital-AnalogueConverter of the CD recorder ensures a high sound quality via the analogue output. We recommend that both digital and analogue connections be made, so that analogue recordings can be made when digital recording is not possible. The most common ways of connecting the CD recorder are explained below. If you still have difficulties with the connections, feel free to contact the Philips Consumer Service desk in your country. (FW538) Note: For recording directly from a CD player the analogue input of the CD recorder should be connected to the analogue output of the CD player. Use the supplied cable with the black plugs. - Analogue recording is always possible!- The number of recordings from the original is unlimited. Digital recordings can be made from CDs (or other sources with an output Sample Frequency of 44. 1 kHz +/- 100 ppm) via the digital input. Important: If you want to play the recorded CD-R disc on a regular CD player, it must be finalized first. Preparing for digital recording 1 Make sure the disc is absolutely free of scratches and dust particles. 3 Press AUTO/MANUAL to switch between auto and manual track numbering. AUTO: The track increments are automatically copied from the digital source material. [. . . ] 2 Press SHUFFLE again to return to normal CD play. Repeat CD, track or program 1 Press REPEAT on the remote control one or more times during CD play. When REPEAT 1 appears on the display, the current track plays repeatedly. When REPEAT appears on the display, the disc or program plays repeatedly. [. . . ]