User manual PHILIPS CD1301S

[. . . ] EN User manual Charge the handset(s) for 24 hours before use ! EN Welcome mode Before using your CD 130, you need to configure it according to the country of use. After a few minutes of charge, the Welcome screen appears. to confirm the country that suits you. Your phone is ready to be used. If you need to re-configurate your CD 130, see page 32. [. . . ] Time Calling a number from the call log 1. and scroll to select an entry. Saving a Call log number into the phonebook 1. Press Up Press Press and scroll to select an entry. , SAVE NUMBER is shown. and press , SAVED is shown. Enter the name 21 EN Deleting a Call log entry 1. Press Up Press Press and scroll and press Down Call log to select an entry. is shown, press Deleting all the Call log entries 1. Press Up Press Down Press and press . to reach DELETE LIST. to confirm. 22 Using the Intercom This function can only be used with a multi-handset configuration. It allows you to make free internal calls, transfer external calls from one handset to another and to use the conference option. Note: Intercom & call transfer is only possible with handsets registered to the same base station. EN Internal call 1. Press . Enter the handset number (up to 5 handsets can be registered to the same base station [handset number 1 - 5]) OR press to call all handsets. 3. Press to answer and to end an internal call. Note: If the handset does not belong to the Philips CD 130 range, this function may not be available. Call transfer to a specific handset when on line During a call in progress you can transfer the external call to a specific handset : 1. and enter the handset number . Switch between internal and external call 1. Long press Long press and enter the handset number . to switch between internal/external call. Conference call via the in-call options 1. and enter the handset number . , CONFERENCE is shown. The 3 people can share the 23 EN Paging Other functions This feature allows you to locate the handset(s). Press any key on the handset to stop ringing once relocated. Chain Dialing If you have entered in your phonebook for example only the main number of a company without the extension, this feature allows you to add the subnumber (extension) of a particular person and to dial out this number. Take the line Scroll and press to open phonebook list. to dial first part. to select an entry and press Enter the extension , each digit blinks to indicate dialed out. Clock and Alarm Settings To set the Date and Time 1. Press Press Press Press Long press and press Down to reach CLOCK/ALARM. , DATE &TIME is shown. and press to confirm. to display the date and time. Note: If you are connected to an ISDN line, the date & time may be updated after each call. Please check the date & time settings in your ISDN system. To set or change the alarm clock settings 1. [. . . ] · Base station is already busy with another handset. Noise interference on your radio or television · The CD 130 base station or mains power pack are too close to electrical appliances. · The phonebook is full. · Move the power pack or base station as far away as possible. · Check your subscription with your network operator. [. . . ]