User manual PHILIPS CD1351S

[. . . ] EN User manual Charge the handset(s) for 24 hours before use ! EN Welcome mode Before using your CD 135, you need to configure it according to the country of use. After a few minutes of charge, the Welcome screen appears. to confirm the country that suits you. Your phone is ready to be used. If you need to re-configurate your CD 135, see page 33. [. . . ] Press Press Press and press Down and press Down , scroll to reach PERSONAL SET. to confirm. to select ON or OFF and press To change the display language 1. Press Press Press and press Down and press Down , scroll to reach PERSONAL SET. to confirm. to select your language and press Advanced settings To change the recall time This option is helpful when using operator services. The default value of recall time that is preset in your CD 135 should be the best suited for your country network and therefore you should not need to change it. Press Press Press and press Down to reach ADVANCE SET. , RECALL TIME is shown. , scroll to select SHORT or LONG and press to confirm. 28 Advanced settings To change the dial mode* 1. Press Press Press and press Down and press Down , scroll *Country dependent The default value of dial mode that is preset in your CD 135 should be the best suited for your country network and therefore you should not need to change it. to confirm. EN to select TONE or PULSE and press Local area code setting* *Country dependent If your local PSTN sends the CID with local area code attached, it is necessary to filter out the local area code when dial back from call log. The AREA CODE function allows you to remove the local area code from the call log entries. The local area code can be set from 1 to 4 digits. Press Press Press and press Down and press Down to reach ADVANCE SET. (the maximums for the area code is 4 digits) and Enter the new area code press to save. This menu allows you to limit the use of your phone to specific calls by barring parts (prefix) of outgoing numbers. You can set 4 different barring numbers. Press Press Press Press and press Down and press Down to reach ADVANCE SET. . To set or change Call Barring and enter the PIN code , press Down to reach BARR NUMBER and press 29 EN 5. Scroll Advanced settings to select the barring number location 1, 2, 3 or 4 and press . Enter the barring number (the maximums for the barring number is 4 digits) and press to confirm. Note: For example if you want to bar international calls, enter the barring number 00. To activate / deactivate Call Barring 1. Press Press Press Press and press Down and press Down to reach ADVANCE SET. to confirm. and enter the PIN code , scroll to select ON or OFF and press To set or deactivate the prefix number This feature allows you to set the phone to use the cheapest operator prefix. The maximum length of the prefix is 5 digits. Once the prefix number is set, it is automatically inserted at the beginning of each number dialed out. [. . . ] · Manage the remote control quicker. · Play and delete messages. 42 Information Safety information This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. The default product PIN code is preset to 0000. [. . . ]