User manual PHILIPS CD4911B

[. . . ] Register your product and get support at www. philips. com/welcome CD491 CD496 User manual 1 Important safety instructions 2 Your phone 3 4 4 5 5 6 7 8 8 9 9 10 10 10 11 11 12 12 13 13 13 13 13 13 14 14 14 15 15 15 16 17 17 17 7 Phonebook What is in the box Overview of the phone Overview of the base station Main menu icons Display icons 3 Get started Connect the base station and charger Install the handset Configure your phone (country dependent) Change the remote access PIN code Charge the handset Check the battery level What is standby mode?Check the signal strength View the phonebook Search a record Call from the phonebook Access the phonebook during a call Add a record Edit a record Delete a record Delete all records Set the personalized melody Add a contact to the exception list 18 18 18 18 18 18 19 19 19 19 19 20 20 20 20 20 21 21 22 22 22 22 22 22 23 23 24 24 25 25 25 26 26 26 8 Call log Call list type View the call records Save a call record to the phonebook Return a call Delete a call record Delete all call records 4 Calls 9 Redial list Make a call Answer a call End a call Adjust the earpiece/speaker volume Mute the microphone Turn the speaker on or off Make a second call Answer a second call Switch between two calls Make a conference call with the external callers View the redial records Redial a call Save a redial record to the phonebook Delete a redial record Delete all redial records 10 Phone settings 5 Intercom and conference calls Make a call to another handset Transfer a call Make a conference call Sound settings Set the date and time ECO mode Name the handset Set the display language Display settings 11 Alarm clock Set the alarm Turn off the alarm 6 Text and numbers Enter text and numbers Switch between uppercase and lowercase EN 1 Eng l i sh Contents 12 Services Auto conference Call barring Call list type Auto prefix Network type Select the recall duration Dial mode First ring Auto clock Register the handsets Unregister the handsets Call services Restore default settings 27 27 27 27 28 28 28 28 29 29 29 30 30 31 32 32 32 33 34 34 34 34 34 35 39 42 43 43 43 43 43 45 46 46 13 Baby monitor Activate/Deactivate the baby monitor Send an alert Set the baby cry level 14 Telephone answering machine Turn the answering machine on or off Set the answering machine language Set the answer mode Announcements Incoming messages (ICM) 15 Menu structure 16 Technical data 17 Notice Declaration of conformity Use GAP standard compliance Compliance with EMF Disposal of your old product and batteries 18 Frequently asked questions 19 Appendix Text and number input tables 2 EN 1 Important safety instructions Power requirements This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be lost. The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60950. Warning The Electrical network is classified as hazardous. [. . . ] Select [On] to activate, or [Off] to deactivate the silent mode, then press [OK] to confirm. Select [Ring delay], then select an option. The setting is saved. Note Select [Menu] > > [Sounds] > [My sound], then press [OK] to confirm. Select a profile, then press [OK] to confirm. The setting is saved. Access the sound profile during a call Press [Sounds] for once or several times to change the sound profile during a call. Set the date and time For further information, see chapter 'Get started', sections 'Set the date and time' and 'Set the date and time format'. If [Exception] is set to [On] and [Ring delay] option is selected, the handset rings only after length of ring delay selected is reached. Make sure that the contact under the [Set exception] option of the phonebook menu is set to [On] before you can exclude this contact from the silent mode. ECO mode The ECO mode reduces the transmission power of the handset and base station when you are on a call or when the phone is in standby mode. Set the key tone Key tone is the sound made when you press a key on the handset. 1 2 1 2 Select [Menu] > > [Sounds] > [Key tone], then press [OK] to confirm. Select [On]/[Off], then press [OK] to confirm. The setting is saved. Select [Menu] > > [Eco mode], then press [OK] to confirm. Select [On]/[Off], and press [OK] to confirm. ECO is displayed in standby mode. Note Set the docking tone Docking tone is the sound made when you place the handset on the base station or charger. When ECO is set to [On], the connection range between the handset and the base station can be reduced. 1 2 Select [Menu] > > [Sounds] > [Docking tone], then press [OK] to confirm. Select [On]/[Off], then press [OK] to confirm. The setting is saved. 24 EN The name of the handset can be up to 14 characters. It is displayed on the handset screen in standby mode. You can set the backlight of the LCD screen and keypad flashing on or off when the phone rings. 1 2 1 2 3 Select [Menu] > > [Phone name], then press [OK] to confirm. The setting is saved. Select [Menu] > > [Display] > [Visual alert], then press [OK] to confirm. Select [Flashing on]/[Flashing off], then press [OK] to confirm. The setting is saved. Set the display language Note This feature only applies to models with multiple Languages available vary from country to country. language support. 1 2 Select [Menu] > > [Language], then press [OK] to confirm. Select a language, then press [OK] to confirm. The setting is saved. Display settings You can change the brightness of the phone display during standby mode. Set the display 1 2 3 Select [Menu] > [OK] to confirm. > [Display], then press Select [Brightness], then press [OK] to confirm. Select an option, then press [OK] to confirm. EN 25 Eng l i sh Name the handset Set the backlight of the LCD screen 11 Alarm clock Your phone has a built-in alarm clock. Check the information below to set your alarm clock. When the alarm rings Press[Off] to turn off the alarm. Press [Snooze](or any key except [Off] ) to snooze. [. . . ] Bad audio (crackles, echo, etc. ) The handset is nearly out of range. The phone receives interference from the nearby electrical appliances. The phone is at a location with thick walls. Make sure the handset ringtone is turned on. [. . . ]