User manual PHILIPS CD605

[. . . ] Thank you for buying this Philips Compact Disc Recorder / Player Double Deck. in the eighties Philips invented a new audio system - the CD. The CD (compact disc) revealed to you the new dimensions of digital sounds and added to the pleasures of audio. Compact disc technology permits a high contrast in loud as well as in quiet passages, with perfect channel separation. [. . . ] English High speed recording from internal CD player If DOES NOT FIT appears on the display, there is not enough recording space left on the CDR(W) disc. You can press RECORDING-RECORD: only complete tracks that still fit on the CDR(W) will recorded. Or You can press PROG to select one or more tracks for recording (see programming): - rotate the EASY JOG/ENTER key to the required track number, then press the key (or ENTER on the remote control) or - directly select the track number via the 10-keypad on the remote control then press the ENTER key to confirm your selection and go to the next step. During high speed recording the sound is not audible. Preparing for high speed recording 1 Make sure that the recording disc is absolutely free of scratches and dust particles. UPDATE lights up, RECORD goes out and recording stops. (Minimal track length must be 4 seconds otherwise silence will be added to the track. ) · If STOP was pressed within 3 seconds after RECORDINGRECORD, no recording will take place. After recording, the display shows UPDATE for several seconds. the Total time indications can differ slightly. Note: In this Recording mode, the Pause function is not operative. 7 seconds silence during analogue recording. OFF (MANUAL): While recording track numbers can be incremented manually by pressing TRACK INCR(ement) on the remote control. ) (This can also be done in Auto track ON mode. ) · Track numbers cannot be changed after recording. Note: Auto track works only with Consumer Sources with a digital output signal according to the IEC 958 (consumer part) audio standard. 3 With the recorder stopped, press RECORDING-TYPE five times to enter the Manual Record standby mode. If you want to play the recorded CDR disc on any regular CD player, it must first be finalised. For recording from CD changers always use REC EXT Autostart recording from external CD player DISC. ⷠIf, however, you start the source during a track, CD-SYNC recording starts at the beginning of the next track or after 2. (This can also be done during recording) The EASY JOG/ENTER key can be used to adjust the recording level. If STOP 9 was pressed within 3 seconds after pressing PLAY, no recording will take place. [. . . ] The first album title in the recorder memory appears on the display. Note: - If there are no discs in the memory, the message MEMORY EMPTY appears on the display. - When the text memory of your CD recorder is full, the message MEMORY FULL will appear, followed by FINALIZE CD. If you want to add a CD to the list of discs for which text is stored, you have to erase a disc from this list or finalise another disc. [. . . ]