User manual PHILIPS CD6660

[. . . ] It contains important information and notes regarding your phone. 1. 1 Power requirements · This product requires an electrical supply of 220-240 volts AC. In case of power failure, the communication can be lost. · The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. [. . . ] and the LED on the handset will blink to remind you of any unanswered calls received. If the identity of the caller is not withheld, the name (or number) of the caller will be displayed. The unanswered calls are displayed in chronological order with the most recent unanswered call at the top of the list. 5. 4. 1 How to access the call log to access the call log 1 Press to enter Call List 2 Press · The latest unanswered call is displayed. / to view the entries 3 Press 19 5. 3. 6 How to store direct access memory You can store up to 9 direct access memories (Key to ). A long press on the keys in idle mode will automatically dial the stored phone number. Depending on your country, Key 1 and Key 2 may be preset to the voice mail number and information service number of your network operator respectively. In this case, Key 1 and Key 2 will not display. If voice mail number and information service number of your network operator are unavailable, Key 1 and Key 2 will display on top of Key 3 as the direct access memory options, see Sections 5. 9. 2 and 5. 9. 3 for details. In idle mode: to access the main menu 1 Press / to select Phonebook 2 Press and / to scroll to Direct 3 Press Memory and / to scroll to a direct 4 Press access memory location from Key 1 to Key 9 twice to select Add 5 Press and / to select the 6 Press phonebook entry that you wish to store into the selected direct access memory to confirm 7 Press · A beep tone is emitted and your phonebook entry is saved into the selected direct access memory key. Tip Long press the direct memory key will dial out the phone number directly. Use more of your phone CD645. QXD 2/1/07 10:18 AM Page 20 5. 4. 2 How to save call log entry to phonebook 5. 5. 1 How to access the redial list In idle mode: to access the call log 1 Press to enter Call List 2 Press / to select an entry 3 Press to select Copy to Phbk 4 Press to enter the name 5 Press to display the selected 6 Press unanswered call number and edit the number if necessary to choose a group (<No Group>, 7 Press <Group A>, <Group B>, <Group C>) to confirm 8 Press · A beep tone is emitted and the selected call log entry is saved into your phonebook. 5. 4. 3 How to delete the call log entry In idle mode: 1 Press · The latest last number dialed is displayed at the top of the list. Tip You can also deactivate the keypad lock by removing and replacing the batteries of the handset. 5. 7. 1. 6 How to turn on/off the first ring If you have subscribed for Caller ID service with your service operator, your phone can suppress the first ring before the Caller ID. After resetting, your phone will automatically detect if Caller ID service is subscribed and start to suppress the first ring. You can change this settings to suit your preference. to access the main menu 1 Press / to select Personal Set 2 Press to select Handset Tones 3 Press and / to select First Ring 4 Press and / to select On or Off 5 Press to save the settings 6 Press 5. 7. 1. 7 How to turn on/off the SMS tone A tone is emitted when a new SMS is received. to access the main menu 1 Press / to select Personal Set 2 Press to select Handset Tones 3 Press and / to select SMS Tone 4 Press and / to select On or Off 5 Press to save the settings 6 Press How to set a wallpaper to be displayed in standby mode There are three wallpapers pre-installed in your phone. You can select your desired wallpaper to be displayed in standby mode. to access the main menu 1 Press / to select Personal Set 2 Press and / to select Wallpaper 3 Press 5. 7. 2 22 Use more of your phone CD645. QXD 2/1/07 10:18 AM Page 23 4 5 and / to scroll to your Press desired wallpaper Press to save the settings 5. 7. 3 How to adjust the contrast level There are five contrast level options (Level 1, Level 2, Level 3, Level 4 or Level 5). to access the main menu 1 Press / to select Personal Set 2 Press and / to select Contrast 3 Press and / to scroll to your 4 Press desired contrast level Note The contrast effect will display when browsing different contrast levels. to save the settings 5 Press How to set the colour theme of your phone There are four different colour theme provided in your phone. You can select your desired colour theme for displaying the menu screen. to access the main menu 1 Press / to select Personal Set 2 Scroll to select Colour Theme 3 Press and / to scroll to your 4 Press desired colour theme Note The corresponding colour theme will display when browsing the different colour theme options. [. . . ] · Check with your local phone company and select the correct recall duration The handset LCD displays nothing. · Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset (see Section 5. 8. 6) · Make sure the two supplied rechargeable batteries have been inserted properly into the battery compartment · Remove and place back the handset batteries · Make sure the supplied batteries are charged up The handset displays Unregistered. · Follow the procedures to register the handset to a base Sound Handset does not ring!· Increase the volume · Make sure that the adaptor and the phone cord are connected properly · Move the handset closer to the base unit · Make sure the handset ringer is turned on Frequently asked questions In this chapter you will find the most frequently asked questions and answers about your phone. [. . . ]