User manual PHILIPS CD710-05B

[. . . ] Note:The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. Connect the brown wire to the terminal marked L or coloured red. [. . . ] Repeats a track, an entire CD(RW), or a program Plays tracks in random order CDR, the total number of tracks and the total playing time of the disc are displayed. Due to the large number of tracks this could take up to 2 minutes. The demonstration mode displays various features of the set and will start automatically when no key has been pressed for several minutes or during standby. To cancel the demonstration mode keep Ç on the set pressed for at least 5 seconds. 1 Press É either on CD player side or CD recorder side Å to start playback. CD or CDR, the current track number and elapsed playing time are displayed. Notes: Opening the CD player clears any program containing tracks from a disc loaded in the CD player. Opening the CD recorder clears any program containing tracks from a disc loaded in the CD recorder. If you want to play a playlist which you created on your MP3-CD when making it, you have to select it directly by using ¢ or 4 and pressing É afterwards. Repeating a track, a disc or a program Press REPEAT repeatedly on the remote control during playback to select either: REP TRACK:The current track is played repeatedly. REP DISC:The entire selected disc is played repeatedly. You can record up to a maximum of 99 tracks on a disc. If the recording time left on the disc is less than 7 seconds, DISC FULL is displayed and you cannot enter the recording mode. Copyright protection The Serial Copy Management System (SCMS) prevents the making of a digital copy from a digital copy. The system allows making a digital recording from the original, however, in some countries this may require the authorisation of copyright holders. When you try to record copy protected material from an external source, COPY PROTECT will be displayed. Recording CD text If the original CD has CD text, this text will be recorded automatically, provided that the CD text is not copy protected. in that case , recording of CD text will not be possible and TEXT PROTECT will be displayed. Finalizing is a simple process that completes the recording of a CDR(W) necessary to: ­ play a recorded CDR on a standard CD player, ­ play a recorded CDRW on a CDRW compatible CD player and CD recorder, ­ avoid unwanted recordings on a disc, or ­ avoid accidental erasure of tracks on a CDRW. CDRs are "locked" once they are finalized. No other tracks or CD text can be added. CDRWs are also "locked" once they are finalized, but can be unfinalized to permit additional recording or erasure. [. . . ] You can also erase tracks 5, 4 and 3, but you cannot erase tracks 5 and 3!4 As soon as the cursor starts blinking, use the number/alphabet keys on the remote control to select a character. After selecting a character the cursor automatically moves to the next character space. If an unfinalized CDRW is inserted: ERASE is displayed, the operation time left starts to count down and erasing starts. [. . . ]