User manual PHILIPS CD931-01S

[. . . ] The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. To avoid damage or malfunction Caution ??Use only the power supply listed in the user ??Use only the batteries listed in the user instructions. [. . . ] The call log is displayed. or select [Menu] > [OK] to confirm. , then press 32 EN Tip ??If you select [Auto] on the handset, the idle line is pre-selected for an outgoing call, with [Home] as the highest priority. If you select [Manual], select an icon among these three options. Delete all call records 1 Access the call log menu on the handset/ base station (see ?Access the call records?in the previous paragraph in this chapter). A confirmation request is displayed on the handset. All records are deleted. 2 Select [Option] > [Delete all], then press 3 Press [OK] to confirm. Save a call record to the phonebook 1 Access the call log menu on the handset/ base station (see ?Access the call records?in the previous paragraph in this chapter). 2 Select a record, then press [Option]. 3 Select [Save], then press [OK] to confirm. 4 Enter and edit the name, then press [OK] 5 to confirm. Enter and edit the number, then press [Save] to confirm. The record is saved. Delete a call record 1 2 Access the call log menu on the handset/ base station (see ?Access the call records?Then select a line to make the call. Tip ??If you select [Auto] on the handset, the idle line is pre-selected for an outgoing call, with [Home] as the highest priority. If you select [Manual], select an icon among these three options. 3 Select [Delete], then press [OK] to 4 Press [OK] to confirm. 34 EN Delete all redial records 1 Access the redial list on the handset/base station (see ?Access the redial list?in the previous paragraph in this chapter). 2 Select [Option] > [Delete all], then press 3 Press [OK] to confirm. [OK] to confirm. A confirmation request is displayed on the handset. The record is deleted. EN 35 11 Phone settings You can customize the settings to make it your own phone. 3 Select [On]/[Off], and press [OK] to confirm. ECO is displayed in standby mode. Note Access the phone settings menu On the handset Select [Menu] > , then press [OK] to confirm. When ECO is activated, the connection range between the handset and the base station can be reduced. Name the handset The name of the handset can be up to 14 characters. It is displayed on the handset screen in standby mode. 1 Press MENU. 2 Select [Phone setup], then press [OK] to confirm. 1 Set the date and time For information, see ?Set the date and time?section. 2 Select [Phone name], then press [OK] to 3 confirm. Access the ?Phone settings? [. . . ] The PC application software only supports Bluetooth devices with Bluetooth protocol driver specified below. Check your Bluetooth device and change it if necessary. ? Microsoft Stack compatible ? Broadcom Stack V 5. 1. 0. 1700, V 5. 1. 0. 2100 and 5. 1. 0. 3500 Retail I still cannot pair my computer with SE888 even I have changed my Bluetooth device. Disable the internal computer Bluetooth device. [. . . ]