User manual PHILIPS CDC775/05G

[. . . ] pg 09-21/CDC775/17-Eng 2/16/00 9:26 AM Page 9 CONTENTS Introduction . . 21 INTRODUCTION Thank you for selecting the Philips CDC 775 Compact Disc Changer. A Compact Disc Changer of the state-of-the-art Philips 700 series, the CDC 775 combines supreme playback quality with a high degree of user-friendliness by offering the following possibilities: ­ able to play CD-RW disc; ­ changing CDs during play; ­ quick access to a particular CD by means of QUICK PLAY; ­ storing 40 tracks from different CDs in any desired order in the changer memory; ­ storing the required recording time and playing time in the EDIT mode. INSTALLATION Free standing · Always position the changer horizontally on a flat, firm surface. · Allow a free space of at least 3 cm above the changer so as not to interfere with the cooling of the changer. [. . . ] NO dISC lights up when there is no CD in the selected CD compartment. You can also select the number by using the DISC button on the remote control. · When the player reaches a track which you wish to hear in full, press SCAN again or PLAY 2. Starting With A Particular Track (CD DIRECT PLAY, S T and PLAY 2) · First select the number of the required CD using CD DIRECT PLAY or DISC on the remote control. ­ If the CD compartment was open, it will now close. Playback will stop as soon as the last track of the current CD has been played (in normal order). 1 Repeating a track: · Press REPEAT before or during playback of the CD. ­ REPEAT 1 lights up; the track will now be repeated continuously. TRACK TRACK TIME 1 · Press TIME, if you wish to know the total playing time from the beginning (TOTAL TIME). TRACK TOT TIME REPEAT 1 Calling Up Information On Display (TIME) In STOP mode: Text display ­ After loading the CDs and closing the CD compartment, the display shows the number of the CD to be played (= default display in STOP mode). 3 2 1 · Press REPEAT three times to stop the track being repeated. Repeating a CD: · Press REPEAT twice before or during playback of the CD. ­ REPEAT DISC lights up; the CD will now be repeated continuously. TRACK TRACK TIME 1 · Press TIME again if you wish to know the remaining playing time of the entire CD (TOTAL REM TIME). TRACK TOT REM TIME 1 1 Note : ­ TOTAL REM(aining) TIME and TOTAL TIME indications are not available in SHUFFLE mode. REPEAT DISC · Press REPEAT twice to stop the CD being repeated. pg 09-21/CDC775/17-Eng 2/16/00 9:26 AM Page 17 PLAYBACK Note: ­ Repeating of a CD is not possible during shuffle or program mode. Repeating all CDs: · Press REPEAT three times before or during playback. ­ REPEAT lights up; all CDs will now be repeated continuously. TRACK TRACK TIME ­ When the loudest passage has been found it will be repeated continuously (from 2 seconds before the peak until 2 seconds after the peak) and PEAK lights up. · You can now adjust your recording device. · You can stop the scan by pressing STOP 9: if you press PLAY 2, the CD will be played from the beginning. Locking the volume This unique feature allows you to lock the volume level when listening to the heaphones or doing recording. · Press EDIT for more than 2 seconds. Unlocking the volume · Press EDIT for more than 2 seconds. ­ The displays will show VOL 20. 1 REPEAT · Press REPEAT again to stop the CDs being repeated. NOTE!­ When a program has been stored (for one or more CDs), then only the program will be repeated. NOTES!­ When searching for the loudest passage in a program (from one or more CDs) there is no need to enter the CD number(s). ­ If you wish to record tracks from different CDs you have to repeat peak search for each CD. ­ You can interrupt PEAK SEARCH by pressing STOP 9. Note: ­ When you adjust the volume and the display shows VOL LOCK, it means that the volume is in the lock mode. Listening to the heaphones · Connect the headphones to the PHONES socket. · Adjust the headphones sound level with the LEVEL control. Searching For The Loudest Passage (PEAK SEARCH) · In STOP mode, press PEAK SEARCH. ­ SELECt dISC lights up and PEAK starts flashing. · Press PEAK SEARCH again to select the last selected disc or press any CD DIRECT PLAY button or DISC (on the remote control) to select the desired disc. ­ The CD will now be scanned for the loudest passage (the peak). ­ The display shows the track being scanned and its elapse playing time. TRACK PEAK TRACK TIME Adjusting The Sound Level (- VOLUME +) (on the remote control only) The volume output of the CD changer can be adjusted. [. . . ] If the fault remains, try to clear it by switching the changer off and on again. If this also fails to help, consult your dealer. Under no circumstances should you repair the changer yourself as this will invalidate the guarantee!Playback does not start or interruption of playback. [. . . ]