User manual PHILIPS CDI220

[. . . ] If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed to avoid a possible shock hazard should it be inserted into a 13 Amp jack elsewhere. VAROITUS Muiden kuin tässä esitettyjen toimintojen säädön tai asetusten muutto saattaa altistaa vaaralliselle säteilylle tai muille vaarallisille toiminnoille. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). ¶ As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. [. . . ] Improper formatted disc will not play on this DVD Player. 17 /00_8239 19/03/2004, 11:22 AM 210 98882 01-34 CDI220_EU101 17 Disc Operations Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load the disc. To select a playback feature or item Use the 1 2 3 4 or numeric keypad (0-9) on the Remote Control, then press PLAY B to start playback. To access or exit from the menu Press DISC MENU on the Remote Control. For VCD with Playback Control (PBC) feature (version 2. 0 only) PBC playback allows you to play Video CDs interactively, following the menu on the display. In stop mode, use the numeric keypad (0-9) to select a track and PBC will turn off. Playback will start automatically During playback, press DISC MENU; If PBC was ON, it will switch to OFF and continue playback. If PBC was OFF, it will switch to ON and return to menu screen. During playback, pressing RETURN/ TITLE will return to the menu screen (if PBC is on). Basic playback controls Unless otherwise stated, all operations described are based on the use of Remote Control. Pausing playback (DVD/VCD/CD/MP3) English 1 During playback, press PAUSE ;. 2 Playback will pause and sound will be muted. Press PAUSE ; again to select the next picture frame. Changing the Audio Channel For VCD Press AUDIO to select the available audio channels provided by the disc (STEREO, MONO LEFT, MONO RIGHT or MIX MONO). Subtitles (DVD) Press SUBTITLE repeatedly to select different subtitle languages. TT Elapsed 0:16:35 3 Use 2 keys to select an option. 4 Enter hours, minutes and seconds from left to right in the time edit box using remote control numerical key pad. 0:34:27) For DVD Title/Chapter Remain: displays the remaining time of the current title/ chapter. Title/Chapter Elapsed: displays the elapsed time of the current title/chapter. For Super VCD or VCD Total/Single Remain: displays the remaining time of the current total/single track. Total/Single Elapsed: displays the elapsed time of the current total/single track. 5 Press the DISPLAY key to confirm. Playback starts from the selected time on the disc. 20 /00_8239 19/03/2004, 11:22 AM 210 98882 01-34 CDI220_EU101 20 Disc Operations The preview function allows you to reduce the picture of 6 tracks enough to display in a full screen. IMPORTANT! English Preview Function (DVD/VCD) Playing MP3/JPEG Picture CD You have to turn on your TV and set to the correct Video In channel. (See page 14 "Setting up the TV"). General Operation 1 Press PREVIEW. The preview menu appears on the TV screen. Select Digest Type: Select Digest Type: Track Digest Track Digest Disc Interval Disc Interval Track Interval Track Interval 1 Load an MP3/JPEG Picture CD disc. 2 Select Digest Type: Select Digest Type: Title Digest Title Digest Chapter Digest Chapter Digest Title Interval Title Interval Chapter Interval Chapter Interval The data disc menu appears on the TV screen. Use 3 4 to select the folder and press OK to open the folder. 0 0 :3 7 0 3 :5 0 128kbps 001/162 \MP3\ (DVD example) (Video CD example) 2 Press 3 4 to select the PREVIEW type, then press OK. [. . . ] Disc menu: A screen display prepared for allowing selection of images, sounds, subtitles, multi-angles, etc recorded on a DVD. Digital: Sound that has been converted into numerical values. Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks. These jacks send audio through multiple channels, instead of just two channels as analog does. [. . . ]