User manual PHILIPS CDR560-11S

[. . . ] Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Grounding or Polarization - The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. [. . . ] Do not expose the CD recorder, batteries or CDs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). If the CD recorder cannot read CDs correctly, use a cleaning CD to clean the lens before taking the CD player to be repaired. Other cleaning methods may destroy the lens. Always keep the tray closed to avoid dust on the lens. The lenses may cloud over when the CD recorder is suddenly moved from cold to warm surroundings, making it temporarily impossible to play a CD. Leave the CD recorder in a warm environment until the moisture evaporates. Next track/search forward/new track REC LEVEL . Messages as listed and explained here may appear on the display for your guidance. Lights up when digital input is selected and flashes when digital input is incorrect. Repeat function activated during play 5 Track number and time. Lights up during recording and flashes in record standby 8 FINALIZE . - If the CD recorder is placed in a cabinet, make sure that a one-inch space remains free on all sides of the recorder for proper ventilation. 3 Gently push the front of the tray or press OPEN/CLOSE to close the tray (see also Playing a CD). Plays CD(RW) or program in random order Q . Selects the beginning of a previous track STOP 9 . Opens or closes the disc tray When you press a button on the remote control, the indicator on the display will light up. During this process the display will first show OPC and then the number of audio tracks previously recorded. Note: Unless otherwise stated, all operating buttons are on the front of the CD recorder. You will soon discover how easy it is to make your own CDs. Nevertheless, we recommend that you use a CD-RW disc for your first try. The three ways to make recordings are described below: - Digital unsynchronized - Digital synchronized - Analogue · If the disc is a CD-RW and is already finalized you must unfinalize it first (page 15). ⷠIf the disc already contains recordings, the CD recorder will automatically search for the end of the last track, so that you can start recording from there. [. . . ] - If you try to store more than 30 tracks, FULL appears on the display 5 Press PLAY to start programmed play. clearing a program 1 Press STOP if necessary to stop programmed play. 2 Press STOP again to clear the program. 1 Press SHUFFLE (or PLAY) on the remote control before or during CD play to start shuffle play. [. . . ]