User manual PHILIPS CDR602-00S

[. . . ] CAUTION: Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. This product complies with the radio interference requirements of the European Union. Thank you for buying this Philips Compact Disc Recorder. This manual gives instructions for operating this CD recorder. [. . . ] Finalizing If you want to play the recorded CDR(W) on a normal CD player, you must first finalize the disc. Please note that you cannot add anymore tracks on a finalized CDR. This feature enables you to record a single track from a CD, LP or cassette. 1 2 Preparing Place an unfinalized recordable disc , absolutely free of scratches and dust particles in the CD recorder tray. Press SOURCE repeatedly to select the type of connection you made to your source of recording. Examples: - CD-player is connected with its digital out connector directly to the digital in connector of your CD-recorder: connection is DIGITAL I. - CD-player is connected with its analog out connectors directly to analog in connectors of your CD-recorder: connection is ANALOG Press SOURCE repeatedly to select the type of connection you made to your source of recording. Examples: - CD-player is connected with its digital out connector directly to the digital in connector of your CD-recorder: connection is DIGITAL I. - CD-player is connected with its analog out connectors directly to analog in connectors of your CD-recorder: connection is ANALOG - Turntable is connected with its analog out connectors to amplifier/receiver which is connected to the analog in connectors of your CD-recorder: connection is ANALOG DIGITAL I, OPTICAL I or ANALOG lights up and DIGITAL 1, OPTICAL or ANALOG will appear on the display. This feature enables you to manually start and stop a recording record from any source. You can use manual recording for recording live music, or for particular music like classic which cannot be recorded with synchronised recording. Important: For recording from CD-changers, use the RECORD DISC, RECORD TRACK or MAKE CD mode. Track increments During digital recordings, track numbers can be copied automatically from the original. For analog recordings, the set can detect silences (longer then 2. 7 seconds) in the source material and start a new track. Auto Track is however dependent on the quality of the analog source material and will not always increase the track number like on the original. For recordings from noisy external analog sources like LP or cassette tapes we strongly recommend to switch Auto Track to OFF and insert track numbers manually. If you wish to switch Auto Track off or on: 1 1 2 Press STORE/MENU. Turn the EASY JOG/ENTER key to select Auto track ON or OFF. During analog recording, you can always insert track numbers manually by pressing TRACK INCR. Track numbers cannot be changed after recording. With the CD recorder stopped press RECORDING TYPE three times to select REC MANUAL for recording of a single track. [. . . ] Notes: If there are no discs in the memory, the message MEMORY EMPTY will appear on the display. When the text memory of your CD recorder is full, the message MEMORY FULL will appear, followed by FINALIZE CD. If you want to add a CD to the list of discs for which text is stored, you will have to erase a disc from this list or finalize another disc for which text is stored. MEMORY FULL/FINALIZE CD may also appear when unfinalizing a CDRW disc for which text was stored (see `Unfinalizing CDRW discs'). [. . . ]