User manual PHILIPS CDR765-11S

[. . . ] Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Grounding or Polarization - The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. [. . . ] Note: CD-R discs recorded with a computer can only be used when they are correctly treated according the audio standard (IEC958: Consumer part). Do not expose the CD recorder, batteries or CDs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). If the CD recorder cannot read CDs correctly, use a cleaning CD to clean the lens before taking the CD player to be repaired. Other cleaning methods may destroy the lens. Always keep the tray closed to avoid dust on the lens. The lenses may cloud over when the CD recorder is suddenly moved from cold to warm surroundings, making it temporarily impossible to play a CD. Leave the CD recorder in a warm environment until the moisture evaporates. Record Recordable able Start to play or record PAUSE ; . Next track/search forward/new track RECORD. Messages as listed and explained here may appear on the display for your guidance. Lights up when digital input is selected and flashes when digital input is incorrect. - Do not use the CD recorder under extremely damp conditions. - If the CD recorder is placed in a cabinet, make sure that a one-inch space remains free on all sides of the recorder for proper ventilation. Plays CD(RW) or program in random order Q . Selects the beginning of a previous track STOP 9 . Opens or closes the disc tray When you press a button on the remote control, the indicator on the display will light up. 3 Gently push the front of the tray or press OPEN/CLOSE to close the tray (see also Playing a CD). During this process the display will first show OPC and then the number of audio tracks previously recorded. Note: Unless otherwise stated, all operating buttons are on the front of the CD recorder. You will soon discover how easy it is to make your own CDs. Nevertheless, we recommend that you use a CD-RW disc for your first try. The three ways to make recordings are described below: - Digital unsynchronized - Digital synchronized - Analogue · If the disc is a CD-RW and is already finalized you must unfinalize it first (page 15). [. . . ] Note: During Shuffle, Repeat or Program play, search is restricted to within the track being played at the time. 2 Press a track number with the number keys. For 2-digit numbers, press the keys in rapid succession. On the display, the track number appears briefly, followed by the total programmed tracks and total program time. [. . . ]