User manual PHILIPS CDR778-10C

[. . . ] Warranty coverage begins the day you buy your product. For 90 days thereafter, all parts will be repaired or replaced, and labor is free. From 90 days to one year from the day of purchase, all parts will be repaired or replaced, but you pay for all labor charges. After one year from the day of purchase, you pay for the replacement or repair of all parts, and for all labor charges. [. . . ] Note: For recording directly from a CD player the analogue input of the CD Recorder/Player should be connected to the analogue output of the CD player. This connection is only required if you want to play back on the CD Player deck separately from the CD Recorder deck. This connection is only required if you want to record from an external CD player with a digital coaxial output. 1 For playing back separately on the CD Player deck, connect a third cable 3 (not supplied) between the ANALOGUE OUT plugs on the CD Recorder and the INPUT plugs on an amplifier, e. Note: Unless indicated otherwise, all buttons are located on the front of the CD Recorder/Player. If also provided on the remote control, the corresponding buttons on the remote control can be used after the CD Recorder or the CD Player has been selected by pressing CD-R or CD. You will soon discover how easy it is to make your own CDs. Nevertheless, we recommend that you use a CD-RW disc for your first try. The two ways to make recordings are described below: - Digital dubbing (normal or high-speed dubbing) - Recording from an external source: - Digital - Digital with synchronized start using external CD player - Analogue · If the disc is a CD-RW and is already finalized you must unfinalize it first (page 17). ⷠIf the disc already contains recordings, the CD recorder will automatically search for the end of the last track, so that you can start recording from there. ⷠThere must be at least 7 seconds of recording time left on the disc, or you will not be able to activate the record standby mode. - Dubbing will be done one track at a time, meaning that short pauses will be added between the tracks. If you program all tracks in their original sequence and dub at D normal speed (DUBB-1), pauses will not be added. Start dubbing at normal speed (copy a track or program) D Copying one track at a time (DUBB-1) is done at normal speed. Preparing for digital recording 1 Make sure the disc is absolutely free of scratches and dust particles. If necessary, press DUAL to switch off the DUAL mode; DUAL will no longer appear on the display. 2 To select a track for dubbing, briefly press or § on the CD Player one or more times. ⷠIf you want to copy a program, you must enter the program first before selecting DUBB-1 (see Programming, page 2. 0) · If you select a track using the digital key pad on the remote control, dubbing will start automatically. 3 To start dubbing , press PLAY on the CD Player. < DUBB-1 will stop flashing and remain lighted and the selected track or program will be copied at normal speed. The track number and the recording time used will be shown on the display. [. . . ] You can program up to thirty tracks to play in a desired sequence using either the CD Player deck or the CD Recorder/Player. Individual tracks can be included in the program more than once, but will count as a track each time they are included. 3 Press a track number with the number keys. For 2-digit numbers, press the keys in rapid succession. [. . . ]