User manual PHILIPS CDR802-00S

[. . . ] To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. [. . . ] If you wish to store all tracks of the selected disc, rotate the ¡ EASY JOG TM control to select ALL and press YES to store the complete disc in the memory. The number of programmed tracks (STEP), PROG and the total program time are displayed. If the program is used for recording only tracks from discs in the changer should be programmed. We will describe: ­ Recording from internal CD changer ­ Recording from an external source ­ Finalizing CDR(W) discs: Finalizing a CDR(W) disc is a simple procedure, necessary to: ­ play a recorded CDR on a standard CD player; ­ play a recorded CDRW on a CDRW compatible CD player. Always the already recorded tracks of the CDR(W) disc will be taken as reference for the volume level of the following recordings. Auto level control becomes automatically active, when: ­ COMPILE CD is being used, ­ a disc, a track or a track edit is being high speed recorded and the CDR(W) has recordings on it, or ­ a program (consisting from more than one disc) from the CD changer is being high speed recorded. Auto level control will not become active, when: ­ using COPY CD, ­ making recordings from an external source, or ­ making normal recordings in listen mode. Make sure that the CDR(W) is absolutely free of scratches and dust particles. It is advisable to use a CDRW disc for your first try. for recordings , the minimum track length is 4 seconds. You can record up to a maximum of 99 tracks on a disc. the minimum of recording time left on the disc is 7 seconds. Else, DISC FULL is displayed and you cannot enter into the record mode. When a track with copy protected text is encountered TEXT PROTECT will be displayed. Copyright protection The Serial Copy Management System (SCMS) prevents the making of a digital copy from a digital copy. The system allows making a digital recording from the original, however in some countries this may require the authorization of copyright holders. When you try to record a copy protected material from an external source, COPY PROTECT will be displayed. no further digital recording is possible then. When you try to record a copy protected material from the internal CD changer no digital recording is possible, however the CD recorder will automatically switch to analog recording. Switching ALC permanently off If necessary press STOP 9 to stop playback. You can adjust the reference record level for both digital and analog recordings from the internal changer as well as from external sources. This is also possible when ALC is active. [. . . ] After selecting a character, the cursor automatically moves to the next position. Repeat step 6 for adding further characters. Auto copied text When an artists name has been stored for a track, it will be copied automatically into the next track. Or NO to delete the copied text and to enter a new one. [. . . ]