User manual PHILIPS CDR880-11S

[. . . ] If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note:The severed plug must be disposed to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. [. . . ] Press SHUFFLE again to return to normal play. Note:When an MP3 disc is encountered during shuffle play only the tracks on the MP3 disc will be played in random order. After the last track has been played, shuffle play will continue with the next disc. This feature allows to display information such as album title or track title contained on a specially encoded CD. cD TEXT is shown and the album title and album artist's name is scrolled once. CD text when playback is stopped Press CD TEXT/edit to see the following information, which will be scrolled once (if available): ­ Album artist's name ­ Album title CD text during playback Press CD TEXT/edit to see the following information, which will be scrolled once (if available): ­ Track artist's name ­ Track title ID3-tag This feature allows the display of information such as album title or track title contained on an MP3-track. Repeating disc(s), a track or a program Press REPEAT on the remote control repeatedly during play to select: REPEAT TRACK: the current track will be repeated; REPEAT DISC: the current disc will be repeated; REPEAT ALL: all discs in the set or all discs/tracks in the program will be repeated. To return to normal play, press REPEAT on the remote control one or more times until: The REPEAT label disappears from the display. Note: REPEAT DISC is not possible during SHUFFLE or while playing a program. If you created an ID3-tag on your MP3-CD, press CD TEXT/edit during playback to display the following ID3tag information: ­ Album title ­ Track artist's name ­ Track title Erasing tracks Select the tracknumbers you wish to erase with 5 or 6 and erase each number by pressing NO. The next programmed track number will move up to this position and is displayed together with the step number and the total program time. no further digital recording is possible then. When you try to record a copy protected material from the internal CD changer no digital recording is possible, however the CD recorder will automatically switch to analog recording. Switching ALC permanently off If necessary press STOP 9 to stop playback. You can adjust the reference record level for both digital and analog recordings from the internal changer as well as from external sources. This is also possible when ALC is active. This feature can also be used for fading your recordings in or out. 1 2 3 Select the recording source with CD1, CD2 or CD3 for internal recording or with AUX for external recording. press REC LEVEL on the set to enable the ¡ EASY JOG TM control to adjust the record level. Rotate the ¡ EASY JOG TM control to the left to adjust the desired record level. the actual record level (in dB) will be displayed. Note:The loudest sounds on the source should not reach 0 dB maximum (first red level). [. . . ] Only use an unfinalized CDR or CDRW (finalized CDRW must be unfinalized first). The place where the first character can be entered is blinking. rotate the ¡ EASY JOG TM control to select a character. You can also select characters with the ¡ TM keys or the alphabet keys on the remote control. [. . . ]