User manual PHILIPS COLOR TV TP3281C

[. . . ] DFU TP2781 TP3281 TP3681 Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Warranty Verification Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your PHILIPS MAGNAVOX warranty. Owner Confirmation Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss. Model Registration Returning your Warranty Registration Card right away guarantees you'll receive all the information and special offers which you qualify for as the owner of your model. S REG IS TR ATION AY Congratulations on your purchase, and welcome to the "family!" !rry Hu IT N EE DED W Dear PHILIPS MAGNAVOX product owner: Thank you for your confidence in PHILIPS MAGNAVOX. [. . . ] The TV's Audio Output jacks and TV Speaker On/Off control work together to offer you this TV sound option. BEGIN . . PICTURE SOUND FEATURES INSTALL TREBLE BASS BALANCE AVL STEREO Connect the R(ight) and L(eft) AUDIO OUT jacks on the TV to the R and L Audio Input jacks on your amplifier or sound system. Set the audio system's volume to normal listening level. You can now adjust the sound level coming from the audio system with the VOLUME (+) or (­) buttons on the TV or remote. To hear the TV sound from only the audio system speakers. Press the MENU button on the remote to show the on-screen menu. Press the CURSOR DOWN s button to select the SOUND menu. Press the CURSOR RIGHT button and the menu will shift to the right to display an adjustment bar in front of the TREBLE control. Press the CURSOR DOWN s button to select the SPEAKER control. Use the CURSOR UP or DOWN s buttons to select turn the television's speakers OFF. You should now only hear TV sound coming from the audio system speakers. . . . SOUND STEREO TREBLE BASS BALANCE AVL STEREO SLEEP POWER TV AV ON/OFF POSITION FREEZE VCR SWAP SOURCE UP PIP CH DN ACC 3 SMART SMART SOUND PICTURE MENU SURF 5 7 . . . SOUND OFF BALANCE AVL STEREO SAP SPEAKERS AUDIO OUT (RED/WHITE) JACK PANEL JACK PANEL LOCATED ON THEREAR REAR LOCATED ON OF THE TELEVISION OF TELEVISION VOL MUTE CH CC STATUS CLOCK A/CH EXIT TV/VCR 4 6 S-VIDEO VCR MULTI RECORD INCREDIBLE MEDIA 1 L VIDEO ANT "A" 75 AUDIO R/MONO IN-2 IN-1 OUT RCA PHONO PLUG CABLES R L AUX/TV INPUT PHONO INPUT SMART HELP Remember, the audio system may have to be in AUX(iliary) mode to play sound from the TV. 2 AUDIO SYSTEM HOW TO USE THE AUDIO/VIDEO INPUT JACKS AUDIO/VIDEO INPUTS The TV's Audio/Video Input jacks are for direct picture and sound connections between the TV and a VCR (or similar device) that has Audio/Video Output jacks. BEGIN NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current channel (Tuner A or B), to the SVID-R connection, to the AV 1 connection, to the AV 2 connection. This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel (Tuner A or B), to the MM 1 (SVID-R) connection, to the MM 2 (AV 1) connection, to the MM 3 (AV 2) connection. BACK OF TV Connect the VIDEO (yellow) CABLE to the VIDEO IN jack on the back of the TV. Then connect the AUDIO (red and white) CABLES to the AUDIO (left and right) IN jacks on the rear of the TV. Connect the VIDEO (yellow) CABLE to the VIDEO OUT jack on the back of the VCR. Then connect the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR. Use the A/V button on the remote to select the AV 1 channel. With the VCR ON and a prerecorded tape inserted, press the PLAY button to view the tape on the television. 1 S-VIDEO VIDEO 24 ANT "A" 75 L AUDIO R/MONO IN-2 IN-1 OUT AV 1 AV 2 SVID-R VIDEO IN (YELLOW) AUDIO IN (RED/WHITE) 2 OUT OUT ANTENNA IN 4 SLEEP POWER TV AV ON/OFF POSITION FREEZE VCR SWAP SOURCE UP ACC PIP CH DN BACK OF VCR R AUDIO L VIDEO ANTENNA OUT IN IN 3 SMART SMART SOUND PICTURE MENU SURF VCR (EQUIPPED WITH VIDEO AND AUDIO OUTPUT JACKS) VOL MUTE CH CC STATUS CLOCK A/CH EXIT TV/VCR VCR MULTI SMART HELP Remember, with the TV/VCR/ACC switch in the VCR position, pressing the (CLOCK) TV/VCR button will allow you to toggle between the VCR mode and the TV mode. RECORD INCREDIBLE MEDIA IF YOU ARE USING A MONO DEVICE, USE ONLY THE AUDIO R/MONO JACK. HOW TO USE THE AUDIO/VIDEO INPUT JACKS S-VIDEO INPUT The S(uper)-Video connection on the rear of the television can give you better picture detail and clarity, for the playback of SVHS VCR tapes, or Digital Video Discs than the normal antenna picture connections. Note: The VCR (or Digital Video Disc player) must have a SVIDEO OUT(put) jack in order for you to complete the connections shown on this page. BEGIN NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current channel (Tuner A or B), to the SVID-R connection, to the AV 1 connection, to the AV 2 connection. This also applies to the Multi Media button on the remote. [. . . ] For 90 days thereafter, all parts will be repaired or replaced free, and labor is free. From 90 days to one year from the day of purchase, all parts will be repaired or replaced free, but you pay for all labor charges. From one to two years from the day of purchase, you pay for the replacement or repair of all parts except the picture tube, and for all labor charges. After two years from the day of purchase, you pay for the replacement or repair of all parts, and for all labor charges. [. . . ]