User manual PHILIPS COLOR TV TS3256C

[. . . ] If you use a Cable Converter box, set the TV to the same channel as the converter's CH 3/4 switch (on the rear of the converter. ) To order accessories such as those listed below contact your dealer or our Parts Information Center at: 1-800-851-8885. · Two Way Splitter Combination VHF/UHF Antenna Back of TV - Outdoor or Indoor Antenna receives normal broadcast channels 2-13 (VHF) and 14-69 (UHF). Round Cable 75 Ohm PIP ANT "B" 75 ANT "A" 75 8 +R­ ­L+ 8 SURROUND SOUND ATTENTION - TO AVOID DAMAGE S-VIDEO 1. DO NOT CONNECT SURROUND SOUND SPEAKERS TO A SEPARATE AMPLIFIER OR TO SPEAKERS CONNECTED TO ANOTHER PRODUCT. [. . . ] This makes it easy for you to select only the TV stations in your area when the CHANNEL (+), (­) buttons are pressed. Note: Auto Program will automatically detect if cable or antenna channels are being received and change the TUNER feature to the correct setting. Press the MENU button on the remote to show the on-screen menu. Press the CURSOR DOWN s button three times to select the INSTALL menu. Press the CURSOR RIGHT button and the menu will shift highlighting the LANGUAGE feature. Press CURSOR DOWN s button to highlight the AUTO PROGRAM control. Press the CURSOR RIGHT button to start the Auto Program scanning of channels . . LOCATO TV VCR ACC A/V ON/O FF POSIT ION FREE ZE PICTURE SOUND FEATURES INSTALL LANGUAGE AUTO PROGRAM TUNER CHANNEL EDIT NAME . . . INSTALL LANGUAGE AUTO PROGRAM TUNER CHANNEL EDIT NAME . . . . INSTALL AUTO PROGRAM TUNER CHANNEL EDIT CABLE 12 R POWER SWAP SOUR . . INSTALL LANGUAGE AUTO PROGRAM TUNER CHANNEL EDIT NAME CE UP PIP CH DN 1 MENU UND SO SMAR T SMAR T SURF VOL CC STAT US SLEE VCR RECO RD INCR EDIB PICT URE MUT CLOC E EXIT P K CH A/CH TV/V 2 MUT LE CR TUNE R A/B 3 LI SMART HELP Try it out. Press the CHANNEL (+), (­) buttons and see which channels you can select. Remember, an antenna or cable TV signal must be first connected to your TV. If you want to delete any unwanted channels from the TV's memory, see the CHANNEL EDIT section on the next page. STER EO MEDI A TUNER BEGIN Y ON SCREEN FEATURES ou need to make sure the TV is set to pick up either Cable TV or Antenna signals. In other words, the TV needs to know if you want to receive channels coming from a Cable TV signal or a normal Antenna signal connected to the TV's ANT Input. Press the MENU button on the remote to show the on-screen menu. Press the CURSOR DOWN s button three times to select the INSTALL menu. Press the CURSOR RIGHT button and the menu will shift highlighting the LANGUAGE feature. Press the CURSOR RIGHT button to highlight the NAME options area. Using the CURSOR UP or DOWN s buttons, scroll through a list of channel names provided in the TV's memory. OR You can also enter a channel name manually. Press the CURSOR RIGHT button again, then use the CURSOR UP and DOWN s buttons to scroll through a list of options for the first digit. Press the CURSOR RIGHT button and repeat for the second, third, and fourth digits. Once you have selected a name for the channel, press the MENU button to SAVE the name in the TV's memory and to clear the menu from the screen. . . LOCATO PICTURE SOUND FEATURES INSTALL LANGUAGE AUTO PROGRAM TUNER CHANNEL EDIT NAME . . Don't forget to set AM or PM with the Cursor Up button. The time is broadcast by certain TV stations. We suggest trying PBS first Enter the PBS channel 2 Time was found 12:30 PM use " " to set AM/PM Press ">" to Continue Press ">" to Continue Press ">" to Continue > TV AND REMOTE CONTROL OPERATION TELEVISION ON SCREEN FEATURES BEGIN Press the POWER button to turn the TV ON. Press the VOLUME + button to increase the sound level or the VOLUME ­ button to lower the sound level. Pressing both buttons at the same time will display the onscreen menu. Once in the menu, use these button to make adjustments or selections. Press the CHANNEL UP v or DOWN w button to select TV channels. Note: Press three number buttons for any channels 100 or above. For example: press "1" then "2" then "5" for channel 125. 6 12:00 PM STEREO Slide the TV/VCR/ACC mode switch on the remote control to the TV position and point the remote at the front of the TV when sending commands. ­ VOLUME + POWER MENU CHANNEL REMOTE REMOTE CONTROL BEGIN BATTERY INSTALLATION T o load the supplied batteries into the remote: Point the remote control toward the remote sensor window on the TV when operating the TV with the remote. LOC ATO R POW ER 1. Remove the battery compartment lid on the back of the remote. [. . . ] Then by pressing the SURF button you can quickly view the select channels. See the "Surf" section (in your other owner's manual) to see how to select a series of channels using the Surf button. When used with a VCR this button will pause the playback of a tape. Cursor Buttons Use these buttons to move through the onscreen menu; make selections within the menu; make adjustments to the menu. Also used with a VCR for PLAY, FAST FORWARD, REWIND, and STOP. [. . . ]