User manual PHILIPS COMPACT DISC CHANGER CDC751

[. . . ] Returning your Warranty Registration Card right away guarantees you'll receive all the information and special offers which you qualify for as the owner of your model. Which is located on the bottom of the cabinet. Retain this information for future reference. This "bolt of lightning" indicates uninsulated material within your unit may cause an electrical shock. [. . . ] When the product has been repaired, you must pick up the unit at the center. Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you. Please contact Philips at: 1-800-661-6162 (French Speaking) 1-800-363-7278 (English Speaking) (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages. Please record the model and serial numbers found on the product below. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary. Box 2976, Longview, Texas 75606, (903) 242-4800 This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. We have done our utmost to make the packaging easy to separate into three mono-materials: cardboard (box), expandable polystyrene (buffer), polyethylene (bags, protective foam). Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, dead batteries and old equipment. Make sure there is adequate ventilation to prevent the system from overheating. ⷠThe mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated. You can connect the audio left and right OUT terminals of another sound system, e. Use the MZ-3 sound controls to adjust the sound of the other system. TM Display shows the volume level VOL and a number from 0-32. SURR or DSC on the remote control once or more to select the desired sound effects: DBB , and Adjust the sound with the controls of the other system. ⷠWhen recording with a CD-R(W), select the CD source on the MZ-3. There are 3 ways to switch the set on: · ­ The volume level, interactive sound settings, last selected source and tuner presets will be retained in the set's memory. [. . . ] The unit will only program stations which are not in the memory already. 1 Press PRESET 4 or 3 (¡ or TM on the remote control) to select the preset number where programming should start. Note: If no preset number is selected, default is preset 1 and all your presets will be overwritten. 2 Press PROGRAM on the set or remote control for more than 2 seconds to activate programming. [. . . ]