User manual PHILIPS CPWBS054

[. . . ] Wireless Base Station 11g CPWBS054 Instructions for use Version 1. 0 2 3 English Hereby, Philips Consumer Electronics, BLC P&A CC, declares that this CPWBS054 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Finnish Philips Consumer Electronics, BLC P&A CC vakuuttaa täten että CPWBS054 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Dutch Hierbij verklaart, Philips Consumer Electronics, BLC P&A CC dat het toestel CPWBS054 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. French Par la présente, Philips Consumer Electronics, BLC P&A CC, déclare que l'appareil CPWBS054 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE Swedish Härmed intygar, Philips Consumer Electronics, BLC P&A CC, att denna CPWBS054 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. [. . . ] Point-to-Point Tunneling Protocol (PPTP) Point-to-Point Tunneling Protocol (PPTP) can be used to join different physical networks using the Internet as an intermediary. Using the above screen allows client PCs to establish a normal PPTP session and provides hassle-free configuration of the PPTP client on each client PC. Enter the assigned IP address, subnet mask and default gateway IP address (usually supplied by your ISP), and then the PPTP User ID, Password and PPPTP Gateway IP address. The MTU (Maximum Transmission Unit) governs the maximum size of the 24 ENGLISH data packets. Leave this on the default value (1460) unless you have a particular reason to change it. Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the PPTP connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 0 minutes) Enable the Auto-reconnect option to automatically re-establish the connection as soon as you attempt to access the Internet again. Static IP If your Internet Service Provider has assigned a fixed IP address, enter the assigned address and subnet mask for the Wireless Base Station 11g, then enter the gateway address of your ISP. DNS Domain Name Servers map numerical IP addresses to the equivalent domain name (e. g. , www. philips. com). Your ISP should provide the IP address of one or more domain name servers. Enter those addresses in this screen. ENGLISH 25 Local netwerk ­ LAN · Local Network IP ­ Use the Local Network menu to configure the Local Network IP address for the Wireless Base Station 11g and to enable the DHCP server for dynamic client address allocation. · Lease Time ­ Set a period for the lease time if required. For home networks this may be set to Forever, which means there is no time limit on the IP address lease. · IP Address Pool ­ A dynamic IP start address may be specified, e. g. Once this start IP address has been assigned, IP addresses running from 192. 168. 2. 100 to 192. 168. 2. 199 will be part of the dynamic IP address pool. IP addresses from 192. 168. 2. 2 to 192. 168. 2. 99, and 192. 168. 2. 200 to 192. 168. 2. 254 will be available as static IP addresses. Remember not to include the address of the Wireless Base Station 11g in the client address pool. Also remember to configure your client PCs for dynamic IP address allocation. 26 ENGLISH Wireless To configure the Wireless Base Station 11g as a wireless access point for wireless clients (either stationary or roaming), all you need to do is define the radio channel, the Network Name (or Service Set identifier/SSID) (Default: philips), and encryption options. Channel and SSID You must specify a common radio channel and Network Name (SSID) to be used by the Wireless Base Station 11g and all of your wireless clients. Be sure you configure all of your clients to the same values. Network name (SSID). This should be set to the same value as other wireless devices in your network. (Default: philips. ) Note: The Network Name (SSID) is case sensitive and can consist of up to 32 alphanumeric characters. [. . . ] If you need more information, consult Windows Help. 56 ENGLISH Troubleshooting The information outlined in this section describes some useful steps for getting your computer and the Wireless Base Station 11g online. A. Verify your connection to the Wireless Base Station 11g If you are unable to access the Wireless Base Station's web-based administration pages then you may not be properly connected or configured. The screen shots in this section were taken on a Windows 2000 machine, but the same steps will apply to Windows 95/98/Me/XP. To determine your TCP/IP configuration status please follow the steps below: 1. Type cmd or command to open a DOS prompt. In the DOS window, type ipconfig and verify the information that is displayed. [. . . ]