User manual PHILIPS CSS2133B

[. . . ] For product support, visit Para obtener asistencia técnica, visite Pour en savoir plus sur l’assistance sur les produits, visitez le site www. hd. philips. com CSS2133B User manual Manuel d’utilisation 3 Manual del usuario 19 37 EN: For further assistance, call the customer support service in your country. • To obtain assistance in the U. S. A. , Canada, Puerto Rico, or the U. S. Virgin Islands, contact Philips Customer Care Center at 1-866-310-0744 • To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 6200 FR: Pour obtenir de l’aide supplementaire, communiquez avec le centre de service a la clientele de votre pays. • Pour obtenir de l’aide aux Etats-Unis, au Canada, a Puerto Rico ou aux lles Vierges americaines, communiquez avec le centre de service a la clientele Philips au : 1-866-310-0744 • Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips a 01 800 504 62 00 ES: Para obtener mas informacion, llame al servicio de soporte al cliente de su pais. [. . . ] d DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. Connectors This section includes an overview of the connectors available on your SoundBar. 8 EN CSS2133B_F7_UM_V1. 0. indb 8 2013/2/22 17:15:21 Rear right AC MAINS~ This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, refer to the type •• Before you make or change any connections, make sure plate at the back or bottom of the product. that all devices are disconnected from the power outlet. AC MAINS~ Connect to the power supply. Subwoofer Follow the steps below to position and connect your subwoofer. Position Place the subwoofer at least one meter (three feet) away from either to the left or right of your SoundBar, and ten centimeter away from the wall. Experience an immersive audio experience with surround sound modes. Adjust the volume Press SURROUND repeatedly to switch surround mode on or off. »» When surround mode is on, the SURR on the front panel lights up. To increase or decrease volume, press VOL +/-. • The Source indicators on the front panel blink once when the volume is set to either minimum or maximum. • The current Source indicator on the front panel blinks continuously. To restore the sound, press MUTE again or press VOL +/-. Night mode For quiet listening, decrease the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press and hold SURROUND for three seconds to turn night mode on or off. »» When night mode is turned on, the AUX indicator on the front panel blinks twice. EN 11 CSS2133B_F7_UM_V1. 0. indb 11 2013/2/22 17:15:21 English Choose your sound »» When night mode is turned off, the MUSIC iLINK indicator on the front panel blinks twice. MP3 player Connect your MP3 player to play your audio files or music. • A 3. 5mm stereo audio cable. 3 CSS2133B to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). »» During connection, the Bluetooth indicator blinks. Wait until you hear a beep sound from the SoundBar. »» When the Bluetooth connection succeeds, and the Bluetooth indicator lights up. »» If the connection fails, the Bluetooth indicator blinks continually. Select and play audio files or music on your Bluetooth device. • During play, if a call is coming, music play is paused. • When your switch back to Bluetooth mode, Bluetooth connection remains active. Note Play music 4 1 2 3 Connect the MP3 player to the SoundBar as described in the Quick start guide. »» MUSIC iLINK indicator on the front panel lights up. Press the buttons on the MP3 player to select and play audio files or music. 5 Play audio through Bluetooth Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • A Bluetooth device which supports Bluetooth profile A2DP, and with Bluetooth version as 3. 0 + EDR. • The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet). •• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. [. . . ] The company is not liable for any damage to or loss of any , programs data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty. This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-Philips product, (b) to damage caused by service performed by anyone other than an Authorized Service Location, (c) to a product or a part that has been modified without written permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished Philips product sold “AS IS” by some retailers. This Limited Warranty does not cover: • Shipping charges to return defective product. [. . . ]