User manual PHILIPS CT3508-BKCUAMHC

[. . . ] Discover your phone Pick up and Wap ( Screen Navigation and , key How to. . . Switch phone On/Off Enter PIN code Press and hold ). Enter your PIN code using the keypad and press , or # to confirm. Enter the phone number on the keypad and press ( to dial. Press < or > in idle mode to select Ringer volume. [. . . ] Auto save SMS Allows you to set On or Off the option of automatically saving messages sent in the $XWR VDYH 606 Archive menu. SMS Archive Allows you to consult all read messages you saved and to Reset all archived 606 $UFKLYH messages at once. You save a message by activating the Auto save SMS option (see above), or by selecting a received message, pressing , twice and selecting Move to Archive. E-Mail If not included in your phone subscription, you must subscribe to an e-mail account (over the phone or via Internet from a computer) and have received the settings information from your provider. In this case, all parameters are communicated to you by your provider and/or operator as described below and must be entered as given. If included in your subscription, you simply have to enter the login, password and e-mail address of your e-mail account. In some cases, your operator might also be your e-mail service provider. Your phone might have been pre-configured. In this case, most parameters are already set and you don't have to change them (except for Login, Password and E-mail address which are up to you when creating an e-mail account). Messages 47 To enter text and numbers, including specific signs such as @ or %, see the characters table described page 24. Selecting this option you need to have both GSM and GPRS settings configured. Settings Network access This menu allows you to configure your phone and to handle the connection to the network, whether GSM or GPRS, in order to then connect to the appropriate server that will let you send and receive e-mails. All options described below are operator and/or subscription dependent. Press , , select Messages > E-mail > E-mail 1 > Settings and press , . Select Network Access and press , . GPRS settings This menu allows you to enter or change the GPRS settings communicated to you *356 6HWWLQJV by your operator, which are: APN, Login and Password. All settings must be entered as given to you by your operator. Error messages during connections are mainly due to incorrect parameters: you should contact your operator before first use, in order to have the appropriate GPRS parameters. GSM settings This menu allows you to enter or change the GSM settings communicated to you *60 6HWWLQJV by your operator, which are: Phone number, Auto disconnection, Login and Password. Phone Number: allows you to enter the phone number provided by your ISP and needed to establish a connection. Press + or - to select: - ISDN Number to enter an ISDN ISP number, OR - Analogue No. to enter an analogic number, then press , . Bearer This menu allows you to select the type of network used when launching a %HDUHU connection. GSM or GPRS: your mobile will only use the GSM or the GPRS network for e-mail connections. GPRS first: your mobile will first try to connect to the GPRS network, then to the GSM network if the GPRS network isn't available when connecting. 48 Messages Contact your ISP to know what type of number you should select. Auto disconnection: allows you to select an inactivity time period after which the phone automatically disconnects (if a connection was is progress) from the network. Press + or - to select a value from 3 to 10min. The lack of exchanges with the network (connecting, sending an e-mail, disconnecting) defines the inactivity time period leading to auto disconnection. Login and Password were up to you when you subscribed to your account. E-mail server access The menus described in this section feature settings needed to connect to the e-mail server of your Internet Service Provider (ISP) via your mobile phone. [. . . ] This limited warranty extends only to the Consumer for Products purchased and used in the original country of purchase. The limited warranty is valid only in Philips' intended country of sales of the product. During the limited warranty period, Philips or its authorized service representative will, at its option either repair or replace, without charge for parts or labour, a materially defective Product with new or refurbished parts or Product and return such repaired or replaced Product to the Consumer in working condition. Philips will retain defective parts, modules or equipment. Repaired or replaced Product will be covered by this limited warranty for the balance of the original limited warranty period or ninety (90) days from the date of repair or replacement whichever is longer. [. . . ]