User manual PHILIPS CTS200-000APMEA

[. . . ] Discover your phone Navigation keys (1) Right key Hang up and on/off key Screen Left key Call and pick up key Philips continuously strives to improve its products. Therefore, Philips reserves the rights to revise this user guide or withdraw it at any time without prior notice. Philips provides this user guide "as is" and does not accept, except as required by applicable law, liability for any error, omission or discrepancy between this user guide and the product described. The device is meant to be connected to GSM network. How to. . . Switch phone On/Off Store Numbers Phonebook Make a call in Press and hold . [. . . ] This function is available only if your SIM card supports it. Call Time Reminder Allows your phone to beep according to the call time. Off Single Periodic The phone does not beep. Allows you to select from 1 to 3000 (seconds) as the beeping time. Allows you to select from 30 to 60 (seconds) as periodic beeping time. The phone will beep at periodic times. You can also select Deactivate to cancel a diverting, select Query Status to check the status. Call Barring This menu allows you to restrict outgoing and incoming calls from your phone. This function is network dependent and requires a specific call barring password supplied by your service provider. The Outgoing Calls menu allows you to select All Calls, International Calls or International Except Home (the latter allowing you to call your home country when you are abroad). The Incoming Calls menu allows you to select All Calls or When Roaming. 22 Settings Auto Redial Allows your phone to redial the number at intervals automatically if the call you make is not answered. To end redialing press or to cancel. Security setup SIM Lock When the SIM Lock is activated, you must enter the PIN code( the PIN code is supplied by the provider with the SIM card). If you enter the incorrect code three times, you need to enter PUK code (PIN unlocking code). The PUK code is used to unlock or change the locked PIN code. If the PUK code is not offered or lost, you can contact with the network provider. Closed User Group This menu needs the corresponding support of network. Usually only the phone is set by network provider can this option is usable. It is mainly used to restrict communications of your phone. After activating you can only talk to the users in the groups with your phone. Network setup Network Selection This menu allows you to select the service network. (Suggest you to select Automatic) Automatic Manual Your phone will automatically select and register a usable network. Provides you with a list of the networks available in the area. Select one from the list to register. Phone Lock This menu allows you to set the password of the phone, the default status is Off. Once you set the status On, you must enter the password each time the phone is powered on. Auto KeyLock Allows you to lock your keypad automatically in idle mode. You can select the interval of locking from the list. To unlock the keypad you can press and . To quickly lock the keypad you can press and . Band Selection This menu allows you to select the band of network for calls. Settings 23 Fixed Dial Allows you to restrict the outgoing calls to designated phone numbers. [. . . ] A financial contribution has been made to the associated national packaging recovery and recycling system (e. g. The plastic material is recyclable (also identifies the type of plastic). 34 Precautions Troubleshooting The phone does not switch on Remove and reinstall the battery. Make sure you plugged the jack of the charger into the correct connector. Then charge the phone until the battery icon has stopped scrolling. [. . . ]